topic Re: icapd ERROR in syslog.log in Operating System - HP-UX

icapd ERROR in syslog.log

sridharr3 — Tue, 08 Nov 2011 03:33:57 GMT

HI, I am getting this error repeatedly in /var/adm/syslog/syslog.log. Nov 8 00:10:18 oraapprd syslog: icapd: ERROR: The following low-level error occurred:ERROR: Failure writing Instant Capacity data to Dynamic Profile.ERROR: The following low-level WBEM error occurred: PNPAR2:@2:Operation failed.[Configuration changes that might affect the Instant Capacity (iCAP) state of this system are not allowed from this partition] icapstatus command works fine (attached output). This is a HP-UX 11.31 system. Let me know if i could ignore this message. Thanks in Advance, Sridhar

Re: icapd ERROR in syslog.log

pradeep m — Tue, 08 Nov 2011 08:36:31 GMT

Hi Sridhar,

Please let us know the following output.

1. # cimprovider -ls

2. The version of WbemServices, ICAP/iCOD and nparprovider installed on the server.

Re: icapd ERROR in syslog.log

sridharr3 — Tue, 08 Nov 2011 09:06:18 GMT

Kindly find the attachment

Re: icapd ERROR in syslog.log

Dennis Handly — Wed, 09 Nov 2011 05:59:48 GMT

>Kindly find the attachment

You forgot the attachment. You may have to add a .txt suffix to your filename.

You can go back and edit your post by using "Options" > Edit Reply