topic Re: Dump device Problem in Operating System - HP-UX

Dump device Problem

suvy12 — Wed, 07 Dec 2011 20:03:23 GMT

I configured /dev/vg00/lvdump as a dump device in HP-UX 11iv3 server by editing /etc/fstab file.

After some time i remove the line from /etc/fstab and run command crashconf -ar but crashconf commnd output still showing size assigned to the dump device(/dev/vg00/lvdump).

How can it be removed from crashconf output.

Hope server reboot not required for that.

Below is the output

Dump compressed: ON

Dump Parallel: ON

DEVICE       OFFSET(kB)   SIZE (kB)    LOGICAL VOL. NAME
------------ ------------ ------------ ------------ -------------------------
3:0x000006      2612064      8388608 64:0x000002 /dev/vg00/lvol2
3:0x000006     66050912     16777216 64:0x00000b
                          ------------
                              25165824

# crashconf -l

DEVICE          LOGICAL VOL.           NAME                 LUNPATH HANDLE
------------    ---------------     -------------------    -----------------------
3:0x000006     64:0x000002         /dev/vg00/lvol2             6/0/8/1/0.0x8.0x0
3:0x000006     64:0x00000b                      6/0/8/1/0.0x8.0x0

Re: Dump device Problem

Patrick Wallek — Wed, 07 Dec 2011 20:27:00 GMT

Try adding the entry for that LV back into /etc/fstab. Check the crashconf output and see if the LV name shows again.

If it does then run 'crashconf -d' and specify the name of that LV to delete it. If it is deleted successfully then remove it from /etc/fstab again.

Re: Dump device Problem

suvy12 — Thu, 08 Dec 2011 00:14:45 GMT

Hi patric,

Actually i removed that LV after removing the entry from /etc/fstab file.

Now accoding to you i recreate that LV with the same name and size and made entry in /etc/fstab also but now i get the below error

# crashconf -a
/dev/vg00/lvdump: warning: duplicate device
#
#
# crashconf -d lvdump /dev/vg00
lvdump: error: can't find device
/dev/vg00: error: can't find device

Opps my mistake it is working

#crashconf -d /dev/vg00/lvdump

it deletes the device entry from crashconf.

Thnx