Operating System - HP-UX의 주제 Re: SSH

SSH

NICOLAS pascal — Wed, 06 Feb 2002 13:44:14 GMT

Hi all,
i would like to know how do you install ssh on hp/ux 11.00.
Were do you find it ?

thx

Re: SSH

Sanjay_6 — Wed, 06 Feb 2002 13:46:35 GMT

Hi,

Try the links suggested in these two forum questions,

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x8464c5ea0230d411ade80090279cd0f9,00.html

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x77905220af9bd5118ff10090279cd0f9,00.html

Hope this helps.

Regds

Re: SSH

Corthouts Carlo — Wed, 06 Feb 2002 14:11:06 GMT

try www.ssh.org

Re: SSH

Rainer von Bongartz — Wed, 06 Feb 2002 14:23:52 GMT

download a hp-ux depot from:

http://hpux.cs.utah.edu/hppd/hpux/Networking/Admin/openssh-3.0.2p1/

Regards
Rainer

Re: SSH

Craig Rants — Wed, 06 Feb 2002 14:25:51 GMT

If you don't care if you use ssh or openssh you can get a depot version at:

http://hpux.ee.ualberta.ca/

Attached are some notes for installing that version.

GL,
C

Re: SSH

Uday_S_Ankolekar — Wed, 06 Feb 2002 14:46:16 GMT

Hi,
Download software from HP's porting site.
http://hpux.cs.utah.edu/hppd/hpux/Networking/Admin/openssh-3.0.2p1/

Either you can download binary zipped or source code and then compile it. ( I would prefer this)

Also note that before installing openssh you "must" first install openssl and zlib. There is a link to these softwares from openssh page.

Goodluck,
-USA..

Re: SSH

John Payne_2 — Wed, 06 Feb 2002 17:41:44 GMT

We use www.ssh.org and pull the source code. Then we conpile it ourselves. They are pretty good about giving us updates and stuff. If you read the 'readme' it is pretty self explainitory...

Re: SSH

Michael Tully — Thu, 07 Feb 2002 03:42:13 GMT

Re: SSH

Barry Feinberg — Mon, 25 Feb 2002 18:29:50 GMT

I am trying to install openssh. I down loaded openssh-3.0.2p1-sd-11.00.depot.gz from the hpux.cs.utah.edu website and unzipped it. I was expecting a depot package to install using swinstall. I got the lib files but no depot. What am I missing?

Re: SSH

Darrell Allen — Mon, 25 Feb 2002 19:27:57 GMT

For Barry:

You should open a new message when you have a question instead of tacking it onto someone else's question.

The answer for you is that openssh-3.0.2p1-sd-11.00.depot.gz is a gzipped depot. Simply gunzip it then specify and run swinstall against openssh-3.0.2p1-sd-11.00.depot.

Darrell