https://community.hpe.com/t5/operating-system-hp-ux/scsi/m-p/2423429#M480233 Because the boards are still attached to the internal bus, they must be terminated or removed. Thu, 18 May 2000 19:20:20 GMT RPC WHQ UNIX Team 2000-05-18T19:20:20Z https://community.hpe.com/t5/operating-system-hp-ux/scsi/m-p/2423428#M480232 Do open ports on "A2969A HSC F/W SCSI" need to be terminated? We will be removing 2 RAID devices which will leave 2 open ports on the SCSI card. Thu, 18 May 2000 15:34:16 GMT https://community.hpe.com/t5/operating-system-hp-ux/scsi/m-p/2423428#M480232 ACS_2 2000-05-18T15:34:16Z https://community.hpe.com/t5/operating-system-hp-ux/scsi/m-p/2423429#M480233 Because the boards are still attached to the internal bus, they must be terminated or removed. Thu, 18 May 2000 19:20:20 GMT https://community.hpe.com/t5/operating-system-hp-ux/scsi/m-p/2423429#M480233 RPC WHQ UNIX Team 2000-05-18T19:20:20Z https://community.hpe.com/t5/operating-system-hp-ux/scsi/m-p/2423430#M480234 Hi there.<BR />Either you remove the interfaces or you put<BR />terminators directly on the connector.<BR />( Take active terminators if possible ).<BR />Rgds<BR />Alexander M. Ermes Wed, 06 Dec 2000 10:44:50 GMT https://community.hpe.com/t5/operating-system-hp-ux/scsi/m-p/2423430#M480234 Alexander M. Ermes 2000-12-06T10:44:50Z