topic Re: Installing 11i 32Bit in Operating System - HP-UX

Installing 11i 32Bit

Nigel Green — Thu, 24 Aug 2006 07:34:22 GMT

Hi all,

I've been asked to install the 32 bit version of 11i on a HP L3000. I;ve tried running the install, but i only have an option for 64 Bit.

Can someone tell me if what I'm trying to do is possible or not?...if so, how?

Many Thanks

Re: Installing 11i 32Bit

Pete Randall — Thu, 24 Aug 2006 07:37:44 GMT

The l-class only supports 64 bit:

http://www.hp.com/products1/unix/operating/public_hp-ux_systems_support.pdf

Pete

Re: Installing 11i 32Bit

Steven E. Protter — Thu, 24 Aug 2006 07:39:57 GMT

Shalom,

If the processor will run either, as is the case with certain D and K class boxes, you will get an option.

This system won't run in 32 bit mode, therefore the installation does not present you with that option.

SEP

Re: Installing 11i 32Bit

Nigel Green — Thu, 24 Aug 2006 07:44:16 GMT

Thanks for the quick response Pete.

Re: Installing 11i 32Bit

Nigel Green — Thu, 24 Aug 2006 07:45:34 GMT

...and Steven.

thread closed

Re: Installing 11i 32Bit

James R. Ferguson — Thu, 24 Aug 2006 07:47:19 GMT

Hi Nigel:

If your applications are 32-bit ones, they will still run on a 64-bit operating system. You should not see any perceptible performance difference between a 32-bit and a 64-bit machine in this case.

Regards!

...JRF...

Re: Installing 11i 32Bit

rick jones — Thu, 24 Aug 2006 19:44:01 GMT

The only processors on which a 32-bit version of an HP-UX kernel are supported are the PA 1.1 CPUs, and the PA-8000 and PA-8200 PA 2.0 CPUs. Anything with a PA-8500 or later (such as the L3000) only runs a 64-bit kernel.