EVWEB - Creating Subscriptions

JDM_Nokia — Mon, 04 Jun 2012 16:33:53 GMT

I am trying to create a subscription that sends an e-mail when one of the power supplies on my HP-UX server loses power. The attached scan shows the specific error message that I am trying to catch.

I have setup the subscription as follows:

severity = 7 Critical

device = System Power

eventID = 103003

I then go out to my server and unplug one of the power supplies. I wait about 10 seconds and then plug it back in. I get the standard EMS alerts (including the 103003 alert), but nothing from EVWEB.

What am I missing?

Thanks!

Re: EVWEB - Creating Subscriptions

JDM_Nokia — Mon, 04 Jun 2012 20:25:34 GMT

Solved my own problem!

The device should be "System Hardware", not "System Power".

You can find this in the Logs section of the SMH under Evweb->Event Viewer. The "Event Category" section of the log section equates to the "Device" section of the Evweb subscription...

topic Re: EVWEB - Creating Subscriptions in Operating System - HP-UX

EVWEB - Creating Subscriptions

Re: EVWEB - Creating Subscriptions