https://community.hpe.com/t5/operating-system-hp-ux/hp-printer-model-interfaces/m-p/2652576#M481283 How can I determine the proper interface model to use for my HP deskjet printers whose models do not show on the jetdirect printer installer software? example deskjet 990, 952, 960<BR /><BR />Of all the models of deskjet HP markets, only three (1200, 1600, and 2000) models are listed. Thu, 24 Jan 2002 22:49:36 GMT tony cocke 2002-01-24T22:49:36Z https://community.hpe.com/t5/operating-system-hp-ux/hp-printer-model-interfaces/m-p/2652576#M481283 How can I determine the proper interface model to use for my HP deskjet printers whose models do not show on the jetdirect printer installer software? example deskjet 990, 952, 960<BR /><BR />Of all the models of deskjet HP markets, only three (1200, 1600, and 2000) models are listed. Thu, 24 Jan 2002 22:49:36 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-printer-model-interfaces/m-p/2652576#M481283 tony cocke 2002-01-24T22:49:36Z https://community.hpe.com/t5/operating-system-hp-ux/hp-printer-model-interfaces/m-p/2652577#M481284 Your best bet is to use either the 'net_genericprinter' or 'dumbplot_printer' script.<BR /><BR />NOTE: The 'dumbplot_printer' script will not provide you with any -o options and the 'net_genericprinter' will provide you with a limited amount of options. Thu, 31 Jan 2002 22:42:41 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-printer-model-interfaces/m-p/2652577#M481284 Doug_17 2002-01-31T22:42:41Z