topic how to map ioscan hadrware path to PCI slot number. in Operating System - HP-UX

how to map ioscan hadrware path to PCI slot number.

simma — Thu, 16 May 2013 11:44:50 GMT

How to find the PCI slot numbers, like which HBA card is attached in which PCI slot from ioscan command output.

I have tried, ioscan -P physical_location, orlad -q and rad -q... but no luck. All these commands are not waorking i n my server. RX2800i2 is the BOX.

Any idea.. please

Re: how to map ioscan hadrware path to PCI slot number.

Torsten. — Thu, 16 May 2013 12:18:45 GMT

There are 2 or 3 slot riser cards.

For 3 slot cards:

primary (left from rear)

top 0/0/0/9/0/0

middle 0/0/0/8/0/0

bottom 0/0/0/7/0/0

secondary:

0/0/0/3/0/0

0/0/0/5/0/0

0/0/0/6/0/0

for 2 slot cards:

primary

top 0/0/0/9/0/0

middle 0/0/0/7/0/0

secondary

top 0/0/0/3/0/0

middle 0/0/0/5/0/0

Re: how to map ioscan hadrware path to PCI slot number.

simma — Thu, 16 May 2013 12:34:53 GMT

Thanks a lot Torsten...

let me post my ioscan output over here.. Can you guide me which HBA card is in which slots

dmocoi :/home# ioscan -fnC fc

Class I H/W Path Driver S/W State H/W Type Description

======================================================================

fc 0 0/0/0/3/0/0/0/5/0/0/0 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter

/dev/fclp0

fc 1 0/0/0/3/0/0/0/5/0/0/1 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter

/dev/fclp1

fc 2 0/0/0/7/0/0/0/5/0/0/0 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter

/dev/fclp2

fc 3 0/0/0/7/0/0/0/5/0/0/1 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter

/dev/fclp3

fc 4 0/0/0/9/0/0/0 fclp CLAIMED INTERFACE HP AH403A 8Gb PCIe 2-port Fibre Channel Adapter

/dev/fclp4

fc 5 0/0/0/9/0/0/1 fclp CLAIMED INTERFACE HP AH403A 8Gb PCIe 2-port Fibre Channel Adapter

/dev/fclp5