topic disk initialization in Operating System - HP-UX

disk initialization

Piotr Kirklewski — Mon, 17 Mar 2014 03:24:33 GMT

Hi there

I have an N class server with 11i version of HPUX.

One of the disks faild so I've replaced it with new one.

ioscan -fnCdisk says:

Disk 3 0/5/0/0.8.0.255.0.0.0 sdisk NO_HW DEVICE SEAGATE ST39102FC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0

I was trying insf -e, but it didnt help.
I was trying other disks, and sytuation is the same.

I dont want to reboot the system.

Is there any other way to make system notice the disk is there ?

P.S. This thread has been moevd from Disk to HP-UX > sysadmin. - hp forum moderator

Re: disk initialization

Torsten. — Thu, 22 Feb 2007 10:28:55 GMT

Hi,

see my post in this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1046729

Re: disk initialization

Torsten. — Thu, 22 Feb 2007 10:30:17 GMT

and here too:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1067729