topic Re: can´t boot rp2470 in Operating System - HP-UX

can´t boot rp2470

Nelson Chamba — Thu, 12 Jun 2014 08:49:46 GMT

Dear Experts,

I can´t boot my rp2470 because it gives me this error:

ISL> hpux -is

Boot

: disk(0/0/2/1.15.0.0.0.0.0;0)/stand/vmunix
Exec failed: Exec format error

I tried booting from many differented sources but nothing changed.

I can see that there are other sources here but i´n don´t what else boot from, the one i used were vmunix.prev

ISL> hpux ls

: disk(0/0/2/1.15.0.0.0.0.0;0)/ .

lost+found ioconfig bootconf system krs

system.d build vmunix dlkm kernrel

rootconf krs_tmp system.prev dlkm.vmunix.prev

vmunix.prev krs_lkg

Please advice?

Nelson Chamba\

Re: can´t boot rp2470

Ajin_1 — Fri, 13 Jun 2014 03:40:56 GMT

Ref below

http://h30499.www3.hp.com/t5/LVM-and-VxVM/Exec-failed-Exec-format-error/m-p/5995585#M50967

Re: can´t boot rp2470

Nelson Chamba — Fri, 13 Jun 2014 08:48:14 GMT

Dear experts,

I don´t even have the # how can i run these commands. I just have the ISL and GSP nothging else.

I have another HDD can i change the boot path or correct the boot config withou change the OS?

Regards,

Nelson Chamba\

Re: can´t boot rp2470

Torsten. — Fri, 13 Jun 2014 14:12:55 GMT

If the disks are mirrored, you may try the other disk. From the boot menu do a "search" and "bo __" boot the path you found.

Re: can´t boot rp2470

Nelson Chamba — Mon, 16 Jun 2014 10:52:07 GMT

Hi the disk are not mirrored, i just have a new blank disk, how can i install the OS there and boot it from there.

How do I make this new boot bootable.

When i run the serach it shows me just the one that fails nothing els. Even the Core OS DVD installed on the TAPE Array 5300 it´s not showing up there to boot from.

Please any idea?

Regards,
Nelson Chamba