topic Re: Warnings during Full Backup in Operating System - HP-UX

Warnings during Full Backup

Milos_Lucic — Thu, 17 Jul 2014 08:40:45 GMT

Hi to all,

I have one question about warning during Full backup and it is pertain on following >>

I was doing Full backup on HP-UX 11.23 and it finished succesfully and after i check /SCINSTALL/log/scbackup.log i got this warning

fbackup(1601) : could not access -i/-e file ./var/spool/sockets

I have checked /var/spool and it really doesn't contain this file, i'm little bit curios to find out for what serves this file what is his purpose and why fbackup ask for it. If someone knows the answer and have similar problem to share and resolve this i would appreciate it.

Thank's

Milos Lucic

Re: Warnings during Full Backup

Dennis Handly — Thu, 17 Jul 2014 13:33:13 GMT

>why fbackup ask for it.

Perhaps it was there at the start of the fbackup but not there when written to output device?

Re: Warnings during Full Backup

Milos_Lucic — Fri, 18 Jul 2014 07:42:32 GMT

As i said in my previous post i check file /var/spool/sockets and it doesn't exists. These happens to me for the last few backups and i got always the same "warning" which i mention above. I posted this thread in case to see if someone have similar problem and know what is all about this type of warning.

So the case that file exist at start and later don't during fb is out.

It is not problem for me to create this file but main question is what is his purpose what it should contain.

Re: Warnings during Full Backup

Torsten. — Fri, 18 Jul 2014 09:10:04 GMT

It is a temp file, don't worry.

Re: Warnings during Full Backup

Milos_Lucic — Fri, 18 Jul 2014 09:43:11 GMT

Thank's for your answer. So i guess its minor warning and i hope i will have some more informations and opinions but many things i need to discover on my own.