HPUX Utilities for an SB40C?

ecbakken — Mon, 11 Aug 2014 19:53:43 GMT

I can't find the right documentation. Are there HPUX utilities to check the status of the drives within the storage blade? Thanks,

-Eric

Re: HPUX Utilities for an SB40C?

Robert_Jewell — Mon, 11 Aug 2014 20:17:50 GMT

The SB40c Storage Blade employs the P400 controller. So you would use the 'saconfig' and 'sautil' utilities to view and manage the logical drives and drives. These utilities are a part of the RAID-01 driver package that you can get from software.hp.com.

To manage the controller offline, you would use the ORCA utility. This is accessed by pressing F8 when prompted during the initilization period at the EFI shell. If the F8 prompt isnt shown you may have to start ORCA by using the proper 'drvcfg -s' command:

- From EFI Shell run the command 'drivers'. Look for the P400 controller instance and note the driver ID.

- Next run the command 'drvcfg' and match the controller ID and driver ID.

- Run the command 'drvcfg -s DrvID CtrlID' to start the offline utility.

-Bob

Re: HPUX Utilities for an SB40C?

ecbakken — Mon, 11 Aug 2014 20:56:05 GMT

This is exactly what I was looking for. Thank you!

topic Re: HPUX Utilities for an SB40C? in Operating System - HP-UX

HPUX Utilities for an SB40C?

Re: HPUX Utilities for an SB40C?

Re: HPUX Utilities for an SB40C?