topic Re: duplex settings & speed in Operating System - HP-UX

duplex settings & speed

Dottie Hamilton — Mon, 11 Feb 2002 19:12:55 GMT

Why is it always the easy things that you can't remember?
I need to find the duplex & speed settings for a server and can't remember how to get them.
thanks think I did a memory dump

Re: duplex settings & speed

James R. Ferguson — Mon, 11 Feb 2002 19:14:59 GMT

Hi Dottie:

# lanadmin -x [ppa|nmid]

where the [ppa|nmid] can be obtained from 'lanscan'.

Regards!

...JRF...

Re: duplex settings & speed

Helen French — Mon, 11 Feb 2002 19:16:34 GMT

Hi,

Try this:

# lanadmin -x (options)

that will give u the information. See man pages of lanadmin and lanscan

HTH,
Shiju

Re: duplex settings & speed

Ron Kinner — Mon, 11 Feb 2002 19:20:37 GMT

You might prefer to just type lanadmin without the options, then type lan when the first menu appears then display. That will show you your first NIC. Look in the top two lines. You can then change to the next nmid (10.20 and earlier) or ppa (11.0 +) and do display again.

Ron

Re: duplex settings & speed

Uday_S_Ankolekar — Mon, 11 Feb 2002 19:27:21 GMT

lanadmin -x then followed by ppid or nmid depending upon OS version.

Check with lanscan with what ppid/nmid is associated with configured lan cards.

Also you can check this with sam >networking and communication >network Interface cards

-Goodluck
-USA..

Re: duplex settings & speed

Sandip Ghosh — Mon, 11 Feb 2002 19:44:12 GMT

You can find out the speed through lanadmin -x and for setting the speed
lanadmin -X