topic Re: setboot and no dsf found in Operating System - HP-UX

setboot and no dsf found

uxbeginner22 — Mon, 04 May 2015 02:19:18 GMT

Running setboot

    setboot
    Primary bootpath : 0/1/1/0.0.0 (No dsf found)
    HA Alternate bootpath : 0/0/2/0.0.0x0.0x0 (/dev/rdisk/disk3)
    Alternate bootpath : 0/1/2/1 (LAN Interface)

My system boot fine,i don't understand why setboot doesn't see the dsf.
I tried

    insf -e 0/1/1/0.0.0`
Nothing change.
Why?

Thanks

p.S. This thread has been moevd from General to HP-UX > sysadmin. - Hp Forum Moderator

Re: setboot and no dsf found

bala_reguraman — Tue, 28 Apr 2015 20:27:40 GMT

Hi,

i guess this could be be a vPars issue as setboot behaves differently in a vPars environment anyway... what version of vPars are you running?

I work for HP

Re: setboot and no dsf found

S_Logan — Tue, 28 Apr 2015 20:32:34 GMT

Hi ,

Please refer the following document:

http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01915883

Re: setboot and no dsf found

Slav_Ivanyuk — Tue, 28 Apr 2015 22:59:09 GMT

The setboot is not translating legacy path. Try setting the agile path. The legacy paths are being depricated, so use the agile dsf.

Legacy HW path
# setboot
Primary bootpath : 0/1/1/0.1.0 (No dsf found)
HA Alternate bootpath : 0/1/1/0.1.0 (No dsf found)
Alternate bootpath : 0/1/1/0.1.0 (No dsf found)

# ioscan -fnH 0/1/1/0.1.0
Class     I H/W Path     Driver S/W State   H/W Type     Description
=====================================================================
disk      1 0/1/1/0.1.0 sdisk   CLAIMED     DEVICE       HP 36.4GST336753LC
                         /dev/dsk/c2t1d0     /dev/dsk/c2t1d0s3   /dev/rdsk/c2t1d0s2
                         /dev/dsk/c2t1d0s1   /dev/rdsk/c2t1d0    /dev/rdsk/c2t1d0s3
                         /dev/dsk/c2t1d0s2   /dev/rdsk/c2t1d0s1

Agile HW path
# setboot
Primary bootpath : 0/1/1/0.0x1.0x0 (/dev/rdisk/disk4)
HA Alternate bootpath : 0/1/1/0.0x1.0x0 (/dev/rdisk/disk4)
Alternate bootpath : 0/1/1/0.0x1.0x0 (/dev/rdisk/disk4)

# ioscan -fnNH 0/1/1/0.0x1.0x0
Class I H/W Path Driver S/W State H/W Type Description
==================================================================
lunpath 1 0/1/1/0.0x1.0x0 eslpt CLAIMED LUN_PATH LUN path for disk4

Change the primary boot path to agile dsf
# setboot -p /dev/rdisk/disk#

Re: setboot and no dsf found

uxbeginner22 — Wed, 29 Apr 2015 15:21:33 GMT

Thanks to all,now works fine the problem was setboot doesn't report the dsf if run as user,run as root report ok