topic Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11 in Operating System - HP-UX

SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

nchat504 — Mon, 05 Oct 2009 14:24:59 GMT

I have an rp4440 and I am trying to attach a DAT72 HP C7438A- external tape drive to one of the SCSI: ext_bus 2 0/1/1/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6829-60101, this card has two ports, so I connected the drive(while the system is up)to the external B port..As soon as i ran the ioscan -f, insf -e.. i get a ton of errors in dmesg, syslog and all over the place.. These are production systems and i am only trying to attach the drive long enough to create an ignite tape for our upcoming DR test..We also have rp3440's in our environment and they are at the same OS level(11.11) and no reboot is required when i attach the (HP C7438A)drive to them.

One thing that i noticed is that the rp3440's use the wide SCSI connection and the tape drive does too..So the SCSI cable i use is same to sameI(68pin) however, the rp4440 use the small SCSI lVD/SE so i had to get a cable that had the smaller SCSI connection on one end the larger SCSI connection on the other to connect to the tape drive.

pardon my terminology..

Can someone help? I need an answer ASAP..

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

Torsten. — Mon, 05 Oct 2009 14:32:01 GMT

There is one important thing on a rp4440:

The core I/O card has 2 external SCSI connectors, because there are 2 internal busses.

NEVER open an active bus!

Depending on your configuration (hardware), the internal disks are on 1 or 2 internal busses.

If they are on 2, you CANNOT (MUST NOT) connect external devices on that bus!

An "ioscan -fn" will clarify if you are using "simplex" or "duplex" disk configuration - post it!

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

Torsten. — Mon, 05 Oct 2009 14:40:19 GMT

BTW, more or less the same kind of problem for the rp3440 - the upper internal disk is sharing the bus with external devices on the built-in connector! If the upper disk is installed, DO NOT connect a tape there!

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

nchat504 — Mon, 05 Oct 2009 16:51:41 GMT

Class I H/W Path Driver S/W State H/W Type Description
==============================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (880)
ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
tty 0 0/0/1/0 asio0 CLAIMED INTERFACE PCI SimpleComm (103c1290)
/dev/diag/mux0 /dev/mux0 /dev/tty0p0
tty 1 0/0/1/1 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag1 /dev/mux1 /dev/tty1p2
/dev/diag/mux1 /dev/tty1p0 /dev/tty1p4
usb 0 0/0/2/0 hcd CLAIMED INTERFACE NEC USB Interface
usbhub 0 0/0/2/0.1 hub CLAIMED DEVICE USB Root Hub
usb 1 0/0/2/1 hcd CLAIMED INTERFACE NEC USB Interface
usbhub 1 0/0/2/1.1 hub CLAIMED DEVICE USB Root Hub
/dev/hub
usb 2 0/0/2/2 ehci CLAIMED INTERFACE NEC USB Interface
sideba 0 0/0/3/0 side_ba CLAIMED INTERFACE CMD IDE controller
ext_bus 0 0/0/3/0.0 side CLAIMED INTERFACE IDE Primary Channel
target 0 0/0/3/0.0.0 tgt CLAIMED DEVICE
disk 0 0/0/3/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-C
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/0/3/0.0.7 tgt CLAIMED DEVICE
ctl 0 0/0/3/0.0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/3/0.1 side CLAIMED INTERFACE IDE Secondary Channel
target 2 0/0/3/0.1.7 tgt CLAIMED DEVICE
ctl 1 0/0/3/0.1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t7d0
ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
ext_bus 2 0/1/1/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6829-60101
target 3 0/1/1/0.1 tgt CLAIMED DEVICE
disk 1 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 73.4GMAS3735NC
/dev/dsk/c2t1d0 /dev/rdsk/c2t1d0
target 4 0/1/1/0.7 tgt CLAIMED DEVICE
ctl 2 0/1/1/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
ext_bus 3 0/1/1/1 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6829-60101
target 5 0/1/1/1.0 tgt CLAIMED DEVICE
disk 2 0/1/1/1.0.0 sdisk CLAIMED DEVICE HP 73.4GMAS3735NC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0
target 6 0/1/1/1.7 tgt CLAIMED DEVICE
ctl 3 0/1/1/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c3t7d0
lan 0 0/1/2/0 igelan CLAIMED INTERFACE HP A6825-60101 PCI 1000Base-T Adapter
ba 2 0/2 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
fc 0 0/2/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fcp 0 0/2/1/0.22 fcp CLAIMED INTERFACE FCP Domain
ext_bus 4 0/2/1/0.22.0.1.0 fcparray CLAIMED INTERFACE FCP Array Interface
target 7 0/2/1/0.22.0.1.0.0 tgt CLAIMED DEVICE
disk 3 0/2/1/0.22.0.1.0.0.0 sdisk CLAIMED DEVICE HITACHI OPEN-L*2
/dev/dsk/c4t0d0 /dev/rdsk/c4t0d0
target 8 0/2/1/0.22.0.1.0.1 tgt CLAIMED DEVICE
disk 4 0/2/1/0.22.0.1.0.1.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t1d0 /dev/rdsk/c4t1d0
target 9 0/2/1/0.22.0.1.0.2 tgt CLAIMED DEVICE
disk 5 0/2/1/0.22.0.1.0.2.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t2d0 /dev/rdsk/c4t2d0
target 10 0/2/1/0.22.0.1.0.3 tgt CLAIMED DEVICE
disk 6 0/2/1/0.22.0.1.0.3.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t3d0 /dev/rdsk/c4t3d0
target 11 0/2/1/0.22.0.1.0.4 tgt CLAIMED DEVICE
disk 7 0/2/1/0.22.0.1.0.4.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t4d0 /dev/rdsk/c4t4d0
target 12 0/2/1/0.22.0.1.0.5 tgt CLAIMED DEVICE
disk 8 0/2/1/0.22.0.1.0.5.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t5d0 /dev/rdsk/c4t5d0
target 13 0/2/1/0.22.0.1.0.6 tgt CLAIMED DEVICE
disk 9 0/2/1/0.22.0.1.0.6.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t6d0 /dev/rdsk/c4t6d0
target 14 0/2/1/0.22.0.1.0.7 tgt CLAIMED DEVICE
disk 10 0/2/1/0.22.0.1.0.7.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t7d0 /dev/rdsk/c4t7d0
target 15 0/2/1/0.22.0.1.0.8 tgt CLAIMED DEVICE
disk 11 0/2/1/0.22.0.1.0.8.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t8d0 /dev/rdsk/c4t8d0
target 16 0/2/1/0.22.0.1.0.9 tgt CLAIMED DEVICE
disk 12 0/2/1/0.22.0.1.0.9.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t9d0 /dev/rdsk/c4t9d0
target 17 0/2/1/0.22.0.1.0.10 tgt CLAIMED DEVICE
disk 13 0/2/1/0.22.0.1.0.10.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t10d0 /dev/rdsk/c4t10d0
target 18 0/2/1/0.22.0.1.0.11 tgt CLAIMED DEVICE
disk 14 0/2/1/0.22.0.1.0.11.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t11d0 /dev/rdsk/c4t11d0
target 19 0/2/1/0.22.0.1.0.12 tgt CLAIMED DEVICE
disk 15 0/2/1/0.22.0.1.0.12.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t12d0 /dev/rdsk/c4t12d0
target 20 0/2/1/0.22.0.1.0.13 tgt CLAIMED DEVICE
disk 16 0/2/1/0.22.0.1.0.13.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t13d0 /dev/rdsk/c4t13d0
target 21 0/2/1/0.22.0.1.0.14 tgt CLAIMED DEVICE
disk 17 0/2/1/0.22.0.1.0.14.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t14d0 /dev/rdsk/c4t14d0
target 22 0/2/1/0.22.0.1.0.15 tgt CLAIMED DEVICE
disk 18 0/2/1/0.22.0.1.0.15.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c4t15d0 /dev/rdsk/c4t15d0
ext_bus 5 0/2/1/0.22.0.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 23 0/2/1/0.22.0.255.0.1 tgt CLAIMED DEVICE
ctl 4 0/2/1/0.22.0.255.0.1.0 sctl CLAIMED DEVICE HITACHI OPEN-L*2
/dev/rscsi/c5t1d0
ba 3 0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
lan 1 0/4/1/0 igelan CLAIMED INTERFACE HP A6825-60101 PCI 1000Base-T Adapter
ba 4 0/5 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
lan 2 0/5/1/0 iether CLAIMED INTERFACE HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 3 0/5/1/1 iether CLAIMED INTERFACE HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter
ba 5 0/6 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
fc 1 0/6/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td1
fcp 1 0/6/1/0.169 fcp CLAIMED INTERFACE FCP Domain
ext_bus 6 0/6/1/0.169.10.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
target 24 0/6/1/0.169.10.0.0.0 tgt CLAIMED DEVICE
disk 19 0/6/1/0.169.10.0.0.0.0 sdisk CLAIMED DEVICE HITACHI OPEN-L*2
/dev/dsk/c6t0d0 /dev/rdsk/c6t0d0
target 25 0/6/1/0.169.10.0.0.1 tgt CLAIMED DEVICE
disk 20 0/6/1/0.169.10.0.0.1.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t1d0 /dev/rdsk/c6t1d0
target 26 0/6/1/0.169.10.0.0.2 tgt CLAIMED DEVICE
disk 21 0/6/1/0.169.10.0.0.2.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t2d0 /dev/rdsk/c6t2d0
target 27 0/6/1/0.169.10.0.0.3 tgt CLAIMED DEVICE
disk 22 0/6/1/0.169.10.0.0.3.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t3d0 /dev/rdsk/c6t3d0
target 28 0/6/1/0.169.10.0.0.4 tgt CLAIMED DEVICE
disk 23 0/6/1/0.169.10.0.0.4.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t4d0 /dev/rdsk/c6t4d0
target 29 0/6/1/0.169.10.0.0.5 tgt CLAIMED DEVICE
disk 24 0/6/1/0.169.10.0.0.5.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t5d0 /dev/rdsk/c6t5d0
target 30 0/6/1/0.169.10.0.0.6 tgt CLAIMED DEVICE
disk 25 0/6/1/0.169.10.0.0.6.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t6d0 /dev/rdsk/c6t6d0
target 31 0/6/1/0.169.10.0.0.7 tgt CLAIMED DEVICE
disk 26 0/6/1/0.169.10.0.0.7.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t7d0 /dev/rdsk/c6t7d0
target 32 0/6/1/0.169.10.0.0.8 tgt CLAIMED DEVICE
disk 27 0/6/1/0.169.10.0.0.8.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t8d0 /dev/rdsk/c6t8d0
target 33 0/6/1/0.169.10.0.0.9 tgt CLAIMED DEVICE
disk 28 0/6/1/0.169.10.0.0.9.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t9d0 /dev/rdsk/c6t9d0
target 34 0/6/1/0.169.10.0.0.10 tgt CLAIMED DEVICE
disk 29 0/6/1/0.169.10.0.0.10.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t10d0 /dev/rdsk/c6t10d0
target 35 0/6/1/0.169.10.0.0.11 tgt CLAIMED DEVICE
disk 30 0/6/1/0.169.10.0.0.11.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t11d0 /dev/rdsk/c6t11d0
target 36 0/6/1/0.169.10.0.0.12 tgt CLAIMED DEVICE
disk 31 0/6/1/0.169.10.0.0.12.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t12d0 /dev/rdsk/c6t12d0
target 37 0/6/1/0.169.10.0.0.13 tgt CLAIMED DEVICE
disk 32 0/6/1/0.169.10.0.0.13.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t13d0 /dev/rdsk/c6t13d0
target 38 0/6/1/0.169.10.0.0.14 tgt CLAIMED DEVICE
disk 33 0/6/1/0.169.10.0.0.14.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t14d0 /dev/rdsk/c6t14d0
target 39 0/6/1/0.169.10.0.0.15 tgt CLAIMED DEVICE
disk 34 0/6/1/0.169.10.0.0.15.0 sdisk CLAIMED DEVICE HITACHI DISK-SUBSYSTEM
/dev/dsk/c6t15d0 /dev/rdsk/c6t15d0
ext_bus 7 0/6/1/0.169.10.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 40 0/6/1/0.169.10.255.0.0 tgt CLAIMED DEVICE
ctl 5 0/6/1/0.169.10.255.0.0.0 sctl CLAIMED DEVICE HITACHI OPEN-L*2
/dev/rscsi/c7t0d0
memory 0 8 memory CLAIMED MEMORY Memory
ipmi 0 16 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi
processor 0 128 processor CLAIMED PROCESSOR Processor
processor 1 129 processor CLAIMED PROCESSOR Processor
processor 2 136 processor CLAIMED PROCESSOR Processor
processor 3 137 processor CLAIMED PROCESSOR Processor
processor 4 144 processor CLAIMED PROCESSOR Processor
processor 5 145 processor CLAIMED PROCESSOR Processor
processor 6 152 processor CLAIMED PROCESSOR Processor
processor 7 153 processor CLAIMED PROCESSOR Processor

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

TTr — Mon, 05 Oct 2009 17:48:18 GMT

Take a look at the user guide on page 116 at the "CAUTION" paragraph. You can not plug in external devices if the SCSI controller is configured in duplex mode. And your server is configured in duplex mode.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01404131/c01404131.pdf

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

Torsten. — Mon, 05 Oct 2009 17:48:30 GMT

This disk is on the second bus:

disk 2 0/1/1/1.0.0 sdisk CLAIMED DEVICE HP 73.4GMAS3735NC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0

so you have a duplex configuration and must not use any external built-in port.

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

nchat504 — Mon, 05 Oct 2009 17:59:46 GMT

In your opinion, what are my options to getting an Ignite image of this system or getting this tape drive to work? I do not have a rw/DVD attached. I have an image that i created from the rp3440, can that be an option to use to build the rp4440?

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

Torsten. — Mon, 05 Oct 2009 18:18:18 GMT

Use another HBA or an ignite server.

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

TTr — Mon, 05 Oct 2009 18:19:03 GMT

The rp3440 and rp4440 are very similar and an ignite image from one server can be used on the other. Take a look at the patch level and add-on software on each server to see if there is something extra on the rp4440. You have 2 extra LAN cards (3 total) and 2 FC HBAs and SAN access on the rp4440 but what about the rp3440?

You can also look into make_net_recovery.

Also you have 2 unused PCI slots in your server, you can add a scsi controller.

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

nchat504 — Mon, 05 Oct 2009 18:32:44 GMT

currently i do not have a designated Ignite server in our environment, can you provide me with instructions to configure one real quick? The only server i can use right now is a spare rp3440, i should be able to turn that one into an ignite server and maybe create a tape from that.

In the meantime, i will make the patch comparison between the rp3440/rp4440

Thanks again for your help.

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

nchat504 — Mon, 05 Oct 2009 22:38:15 GMT

TTr,
You mentioned that there were other slots, are you suggesting i take that card out and put it in another slot? Will that make my issue go away? And if so, which slot?

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

TTr — Tue, 06 Oct 2009 11:21:50 GMT

No I am not suggesting to take the card out. I thought I was clear saying "you can add a scsi controller". You can buy a scsi controller and install it on any available slot.

If you look on the server, the PCI slots #1 and #2 are colored light blue. These slots have factory installed cards, #1 is for the disks and #2 is for the lan. The remaining slots are colored red (or dark red, I am not good with color hues) and are for add on cards.

Each pci slot is attached to an i/o bus and has different i/o bandwidth. Take a look at the quickspecs and the i/o architecture to see the speed of each slot.

http://h18000.www1.hp.com/products/quickspecs/12034_na/12034_na.PDF

Download and save the quickspecs and the user manual, they will soon disappear from the HP web site.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=64180&taskId=101&prodTypeId=15351&prodSeriesId=2512015

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

nchat504 — Tue, 06 Oct 2009 12:26:07 GMT

Thanks, for the info I will be sure to download it.. Ok, now you have got me thinking.. From what i can tell, i can safely connect the tape drive to the rp3440, is there a way i can utilize that tape drive via network? nfs mount or something? I know i am probably grasping at straws but is there anyway i can utilize that tape drive remotely from the rp3440 to the rp4440?

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

Torsten. — Tue, 06 Oct 2009 12:46:48 GMT

Not for ignite restore.

Remember what I said about the rp3440 and the tape connect to the built-in port!

Re: SCSI errors when connecting DAT72(HP C7438A) to rp4440 with 11.11

nchat504 — Tue, 06 Oct 2009 12:55:48 GMT

Im sorry, what i meant to say is can i create an ignite tape for the rp4440 using the tape drive remotely on the rp3440?