topic Re: Boot Failure R2PCI Init Fail in Operating System - HP-UX

Boot Failure R2PCI Init Fail

Tom7073 — Mon, 29 Feb 2016 16:38:11 GMT

I have a C3600 that halted last week with a message on the LED FLT 8870: IO Bd, R2PCI Init Fail.

Is this a motherboard failure?

Any help would be great.

Thanks

Tom

Re: Boot Failure R2PCI Init Fail

Torsten. — Mon, 29 Feb 2016 19:07:48 GMT

I cannot find this exact code in my chassis code table, but IMHO this is an error related to the PCI connection (rope-2-pci ?).

I would try to remoce any PCI card first. But it could really be a bad chip on the board.

Re: Boot Failure R2PCI Init Fail

Steven Schweda — Mon, 29 Feb 2016 20:59:37 GMT

> [...] message on the LED [...]

LCD? (There are LEDs on the inside.)

   I know nothing, but a Google search for the message found it in a:
               Service Handbook
       HP VISUALIZE J6000 Workstations
at:
       http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-lpv37677
(What did _your_ Web search find?)

It looks bad to me, but what do I know?

Re: Boot Failure R2PCI Init Fail

Tom7073 — Mon, 29 Feb 2016 21:02:21 GMT

Torsten,

That the issue there are no cards in this box, Just a video card, which I tried swapping and I tried swapping the power supple and all the ram, and I also placed the hard drive in a different box, which boots fine. The only issue with changing boxes is that the new node id breaks a old software licence file which is based on the Node ID.

Guess I will have see if the vendor can produce a new licence file.

Thanks