topic Re: Connect:Direct error in Operating System - HP-UX

Connect:Direct error

joshi — Thu, 02 Aug 2007 00:48:30 GMT

Hi All,

I am trying to send a file from a unix m/c to a remote m/c using NDM, nodes at both sides are configured. while executing script, I am getting erro as below:

******************************************************
* *
* Connect:Direct UNIX *
* *
*----------------------------------------------------*
* Copyright (c) 1992, 2005 Sterling Commerce, Inc. *
* Version 3.6.01 *
******************************************************

Enter a ';' at the end of a command to submit it. Type 'quit;' to exit CLI.

Direct> **** Error returned...

XCMM005I Return Code: 8 Feedback: 0

Direct>
Connect:Direct CLI Terminated...

******************************************************
* *
* Connect:Direct UNIX *
* *
*----------------------------------------------------*
* Copyright (c) 1992, 2005 Sterling Commerce, Inc. *
* Version 3.6.01 *
******************************************************

Enter a ';' at the end of a command to submit it. Type 'quit;' to exit CLI.

Direct> **** Error returned...

XCMM005I Return Code: 8 Feedback: 0

Direct>
Connect:Direct CLI Terminated...

******************************************************
* *
* Connect:Direct UNIX *
* *
*----------------------------------------------------*
* Copyright (c) 1992, 2005 Sterling Commerce, Inc. *
* Version 3.6.01 *
******************************************************

Enter a ';' at the end of a command to submit it. Type 'quit;' to exit CLI.

Direct> **** Error returned...

XCMM005I Return Code: 8 Feedback: 0

Please provide the solution.

Re: Connect:Direct error

Andrew Young_2 — Thu, 02 Aug 2007 06:55:02 GMT

Hi.

I'm not much of a Connect Direct expert, but I will try to help.

Are these machines new installations, or an installation that has recently stopped. I assume its the latter.

I suspect however that its a syntax error within the script.

Regards

Andrew Y

Re: Connect:Direct error

joshi — Thu, 02 Aug 2007 07:13:14 GMT

there is new setup between two NDM nodes.
where could be syntax error, if you assume.

Thanks

Re: Connect:Direct error

Andrew Young_2 — Thu, 02 Aug 2007 07:35:49 GMT

Hi.

Looking into this error it looks like a permissions error.

You may need to look at your logging on both nodes. The logs are usually kept in //work/. They are usually arranged by date.

Warning: CDirect debugging is can be frustrating.

Andrew Y

Re: Connect:Direct error

joshi — Thu, 02 Aug 2007 07:47:32 GMT

Thanks Andrew for providing info...I am looking into that...
apart from that,
below is my NDM code:
# PROCESS : NDM2
# VERSION : 1.0
# CREATED DATE : 07/11/2002
# AUTHOR : MAREK GOTTESMAN
# SECURITY : COMPANY CONFIDENTIAL
#
# PROCESS DESCRIPTION
#
# THIS FUNCTION EXECUTES NDM TO SEND FILES TO OTHER MACHINES
# (NODES).
#
# THIS IS HOW YOU SEND FILES TO A MVS MACHINE
#
# NDM_NODE=NMD.PACBELLHH
# NDM_FROM_FILE=/appl/pmt/dconnect/marek/from.file
# NDM_TO_FILE=I.IC.TEST.FILE
# NDM_DATATYPE=text
# NDM_XLATE=yes
# NDM_DCB="disp=(rpl) dcb=(RECFM=F,LRECL=300,BLKSIZE=300) "
# NDM
#
# THIS IS HOW YOU SEND FILES TO A UNIX MACHINE
#
# NDM_NODE=soarpmt
# NDM_FROM_FILE=/appl/pmt/dconnect/marek/from.file
# NDM_TO_FILE=/appl/pmt/dconnect/marek/to.file
# NDM_DATATYPE=text
# NDM_XLATE=no
# NDM_DCB="disp=(rpl)"
# NDM
#
# CHANGE INFORMATION
#
# VER # PROGRAMMER DATE DESCRIPTION
#
# 1.0 MAREK GOTTESMAN 07/11/2002 INITIAL VERSION
#
#
#################################################################
NDM2 () {

if [[ $SCRIPT_DEBUG = "Y" ]]
then
set -x
fi
PAGER_FLAG="N"
if [[ $SCRIPT_PAGER = "Y" ]]
then
PAGER_FLAG="Y"
fi

if [[ -z $NDM_NODE ]]
then
print "NDM ERROR: NDM_NODE variable not set "
exit 1
fi

if [[ -z $NDM_FROM_FILE ]]
then
print "NDM ERROR: NDM_FROM_FILE variable not set "
exit 1
fi

if [[ -z $NDM_TO_FILE ]]
then
print "NDM ERROR: NDM_TO_FILE variable not set "
exit 1
fi

if [[ -z $NDM_DCB ]]
then
print "NDM ERROR: NDM_DCB variable not set "
exit 1
fi

if [[ -z $NDM_DATATYPE ]]
then
print "NDM ERROR: NDM_DATATYPE variable not set "
exit 1
fi

if [[ -z $NDM_XLATE ]]
then
print "NDM ERROR: NDM_XLATE variable not set "
exit 1
fi

if [[ ! -z $1 ]]
then
if [[ $1 = "PAGER" ]]
then
PAGER_FLAG="Y"
else
print "NDM ERROR: First arguement not set to PAGER "
exit 1
fi
fi

if [[ $PAGER_FLAG = "Y" ]]
then
FILE_EXISTS $NDM_FROM_FILE PAGER
else
FILE_EXISTS $NDM_FROM_FILE
fi

$NDM_PATH/bin/direct << EOJ
submit
ndm_send process snode=$NDM_NODE class=1
step1
copy from ( file=$NDM_FROM_FILE pnode
sysopts=":datatype=$NDM_DATATYPE:xlate=$NDM_XLATE:strip.blanks=no:" )
compress
to ( file=$NDM_TO_FILE
snode
$NDM_DCB )
step2
if ( step1 eq 0 ) then
run task pnode sysopts="touch ${NDM_FROM_FILE}.FIN "
run task snode sysopts="touch ${NDM_TO_FILE}.FIN "
else
run task snode sysopts="touch ${NDM_TO_FILE}.BAD "
run task pnode sysopts="touch ${NDM_FROM_FILE}.BAD "
eif
pend;
EOJ

}

when the file transfer is unsuccessful,it creates .BAD file. But it is not created.

Re: Connect:Direct error

Andrew Young_2 — Thu, 02 Aug 2007 07:52:09 GMT

Hi Joshi

I don't even think it is running the script. Looking at the logs would be helpful.

Regards

Andrew Y

Re: Connect:Direct error

joshi — Thu, 02 Aug 2007 08:02:58 GMT

Hi Andrew...
I think you are right...

in logs,I found as below
STAR=20070802 00:28:11|CCOD=8|RECI=XCMM|RECC=CAEV|MSGI=XCMM005I|MSGT=ndm_error_set(): rc=8 fdbk=0 msgid=XCMM005I stext=The submit command was not permitted for this user.
STAR=20070802 00:28:11|RECI=CXIT|RECC=CAEV|MSGT=CMGR exited. Pid=5736. Exitcode=1.

permission is not granted --

can you please provide some info over it...

Thanks again

Re: Connect:Direct error

joshi — Thu, 02 Aug 2007 08:05:30 GMT

can I give the required permission any way..

if yes,how?

Thanks

Re: Connect:Direct error

Andrew Young_2 — Thu, 02 Aug 2007 08:11:37 GMT

Hi.

That is granted in the userfile.cfg file in the
//ndm/cfg// directory.

The format is

:cmd.submit=y:\

in the

:\ section.

HTH

Andrew Y

Re: Connect:Direct error

Ash_123 — Tue, 11 Sep 2018 16:18:48 GMT

Hi Joshi,

Getting the same error....can you help me with this?

Would be really appreciated.

Re: Connect:Direct error

Ash_123 — Tue, 11 Sep 2018 16:25:34 GMT

Hi ,

Not able to see any permission grant in the userfile.cfg file.

Can you please be more specific with the data present there.

Please help me with this,getting the same error as above.

Re: Connect:Direct error

Ash_123 — Mon, 08 Oct 2018 10:18:18 GMT

What does the :\ section mean?

Please help

Thanks