topic Re: HPUX Boot issue in Operating System - HP-UX

HPUX Boot issue

Jonathan Grymes — Thu, 12 Sep 2019 15:31:28 GMT

Itanium 2660 HPUX 11.31

Shut the server down this morning to install additional memory.

Server attempts to start up but fails.

Loading.: HP-UX Primary Boot: 0/1/1/0.0x5000c50022e20ff9.0x0
Starting: HP-UX Primary Boot: 0/1/1/0.0x5000c50022e20ff9.0x0

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...efi_do_read: failed with status(Device Error)Start of HP-UX Primary Boot: 0/1/1/0.0x5000c50022e20ff9.0x0 failed: Device Error
Press any key to continue

Re: HPUX Boot issue

Jonathan Grymes — Thu, 12 Sep 2019 15:33:57 GMT

Additioanl Info:

EFI Shell UEFI version 2.00 [14.62]
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part1,SigA62B5158-A127-11E2-8000-D6217B60E588)
fs1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part3,SigA62B519E-A127-11E2-8000-D6217B60E588)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)
blk2 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part1,SigA62B5158-A127-11E2-8000-D6217B60E588)
blk3 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part2,SigA62B518A-A127-11E2-8000-D6217B60E588)
blk4 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part3,SigA62B519E-A127-11E2-8000-D6217B60E588)
blk5 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000CCA00A61A515,Lun0)
blk6 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50005CA4F85,Lun0)
blk7 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000CCA00A62FF09,Lun0)
blk8 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E21035,Lun0)
blk9 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E1D951,Lun0)
blkA : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E1AC09,Lun0)
startup.nsh> echo -off

Re: HPUX Boot issue

Torsten. — Fri, 13 Sep 2019 07:15:31 GMT

This looks good.

Now do

EFI> fs0:

EFI> cd EFI

...

and run the hpux boot loader.

Re: HPUX Boot issue

RajeshVarier — Fri, 13 Sep 2019 07:26:31 GMT

Let us see if you are able to boot in any mode using fs0: like boot -lm etc

If not, suspect a disk issue and do not see any other boot disk.

Re: HPUX Boot issue

Jonathan Grymes — Fri, 13 Sep 2019 12:55:20 GMT

fs0:\> cd EFI

fs0:\EFI> hpux

HP-UX Boot Loader for IPF -- Revision 2.047

Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...efi_do_read: failed with status(Device Error)Exit status code: Device Error

Re: HPUX Boot issue

RajeshVarier — Fri, 20 Sep 2019 06:27:49 GMT

That looks like a disk issue. Could confirm by booting from a OS DVD or ignite and check from recovery shell.