https://community.hpe.com/t5/operating-system-hp-ux/ignite-boot-error-process/m-p/2664374#M49175 I'm having a problem using an ignite installation on an A180 to ignite an A500. I have attached the errors that i am receiving, but, it appears to get through the swinstall of the process, but dies on the subsequent reboot. I receive the following errors (horked.txt) and then the machine reboots, going into a vicious cycle of error, reboot, error, reboot. Any help would be appriciated. Wed, 13 Feb 2002 19:15:30 GMT Tom Smit 2002-02-13T19:15:30Z https://community.hpe.com/t5/operating-system-hp-ux/ignite-boot-error-process/m-p/2664374#M49175 I'm having a problem using an ignite installation on an A180 to ignite an A500. I have attached the errors that i am receiving, but, it appears to get through the swinstall of the process, but dies on the subsequent reboot. I receive the following errors (horked.txt) and then the machine reboots, going into a vicious cycle of error, reboot, error, reboot. Any help would be appriciated. Wed, 13 Feb 2002 19:15:30 GMT https://community.hpe.com/t5/operating-system-hp-ux/ignite-boot-error-process/m-p/2664374#M49175 Tom Smit 2002-02-13T19:15:30Z https://community.hpe.com/t5/operating-system-hp-ux/ignite-boot-error-process/m-p/2664375#M49176 I think you are going to be better off installing the OS from scratch on the A500.<BR /><BR />You problem almost surely stems from the fact that the A180 supports ONLY the 32-bit version of HP-UX and the A500 supports ONLY the 64-bit version of HP-UX.<BR /><BR />See here for the HP-UX 11.x 32/64 bit server support list:<BR /><BR /><A href="http://devresource.hp.com/STK/serversupport.html" target="_blank">http://devresource.hp.com/STK/serversupport.html</A><BR /><BR />Therer is NO way to get around this other than to install the OS on the A500 from scratch. Wed, 13 Feb 2002 19:24:32 GMT https://community.hpe.com/t5/operating-system-hp-ux/ignite-boot-error-process/m-p/2664375#M49176 Patrick Wallek 2002-02-13T19:24:32Z