topic Re: Logical Volume Problem in Operating System - HP-UX

Logical Volume Problem

hahmedma — Thu, 07 Jun 2012 12:38:51 GMT

Dear all;

Kindly be informed that when I tried to perform the full backup on the HP RPserver I had face some sever problem related to Hard ware issue on the standby Hard desk it may be failure and need to be replaced ASAP by a new hard ware for the failure hard desk.

My conclusion for the hard ware failure is depend on the following trace and logs:

The output of the command vgdisplay show that the hard desks are stale and not synchronized due some problem on the standby hard desk
The output of the sys log show some error on the standby hard desk.
Also the ignite trace are full of error for the Hard desk.
Also the Full backup trace contain some error for the hard Desks.
The manuall synchronization for the logical volume are fail.

All the required traces and logs are attached. waiting your Feedback ASAP...

Re: Logical Volume Problem

hahmedma — Thu, 07 Jun 2012 12:39:29 GMT

add more attached

Re: Logical Volume Problem

Patrick Wallek — Thu, 07 Jun 2012 15:54:12 GMT

I agree that it appears that you have a bad disk.

Other than that, I don't see a question anywhere in your post.

Re: Logical Volume Problem

hahmedma — Thu, 07 Jun 2012 16:12:45 GMT

my question is does this bad hard desk make the Full backup of the system is stopped....and how i can fix this bad hard desk...i tried to use "lvsync" but it fail to make the synch for the logical volume

Re: Logical Volume Problem

Patrick Wallek — Thu, 07 Jun 2012 18:15:47 GMT

To fix a bad disk you must replace it.