/opt FS extention

silusan — Thu, 10 Jan 2013 17:30:57 GMT

Need to increase /opt file system from 8Gb to 10 GB. Can I do it without unmounting? How do I do it?

Thank you.

# cat /etc/fstab

# System /etc/fstab file.

Static information about the file systems

# See fstab(4) and sam(1M) for further details on configuring devices.

/dev/vg00/lvol3 / vxfs delaylog 0 1

/dev/vg00/lvol1 /stand vxfs tranflush 0 1

/dev/vg00/lvol4 /home vxfs delaylog 0 2

/dev/vg00/lvol5 /opt vxfs delaylog 0 2 ===> need to increase its size from 8Gb to 10GB

/dev/vg00/lvol6 /tmp vxfs delaylog 0 2

/dev/vg00/lvol7 /usr vxfs delaylog 0 2

/dev/vg00/lvol8 /var vxfs delaylog 0 2

/dev/vg00/osmf /osmf vxfs delaylog 0 2

/dev/vg00/lvol9 /var/adm/crash vxfs delaylog 0 2

# fstyp /dev/vg00/lvol5

vxfs

# swlist -l product | grep vxfs

PHCO_40671 1.0 VRTS 5.0.1 GARP1 VRTS vxfs Command Patch

PHKL_40670 1.0 VRTS 5.0.1 GARP1 VRTSvxfs Kernel Patch

PHKL_41710 1.0 vxfs4.1 cumulative patch

VRTSvxfs 5.0.31.5 VERITAS File System

Re: /opt FS extention

Patrick Wallek — Thu, 10 Jan 2013 19:27:22 GMT

If you have Online JFS / Advanced JFS installed on your system, you can do this online.

# lvextend -L 10240 /dev/vg00/lvol5

# fsadm -b 10240m /opt

# bdf /opt

If you do not have online JFS, you will have to boot to single-user mode, so that /opt is unmounted, and then do the following:

# vgchange -a y vg00

# mount /usr

# lvextend -L 10240 /dev/vg00/lvol5

# extendfs -F vxfs /dev/vg00/rlvol5

# mount /opt

# bdf /opt

The 'bdf' in both steps is just to verify the new size.

To check and see if you have the Online JFS / Advanced JFS license you can try the following:

1) Try the 'vxlicrep' command. If it is installed you should see something like this --

# vxlicrep

Creating a report on all VERITAS products installed on this system

-----------------***********************-----------------

License Key = 010449565889805115946529
Product Name = VERITAS File System
License Type = PERMANENT
Site License = YES

Features :=
HP_OnlineJFS = Enabled

2) Look for the Online JFS bundle of software:

# swlist -l product |grep -i online
OnlineJFS B.11.11.03.03 Online features of the VxFS File System

3) If you execute the 'fsadm -b' command above and it works, then you have the appropriate software. If it does not work, then you will have to use the 2nd set of steps above in single-user mode.

topic /opt FS extention in Operating System - HP-UX

/opt FS extention

Re: /opt FS extention