topic Re: Ignite C.7.16.283 Install Issue - Different Filesets Errors Post Install in Operating System - HP-UX

Ignite C.7.16.283 Install Issue - Different Filesets Errors Post Install

PHSC — Wed, 29 May 2013 03:39:21 GMT

Greetins all. We were updating a Integrity server running HPUX11.31. Moving from Ignite C.7.7.93 and installing to C.7.16.283.

Downloaded a later version of Ignite from HP:

-rw------- 1 root sys 341637120 May 23 13:37 HP-UX_11i_v3_Ignite-UX-11.31_C.7.16.283_HP-UX_B.11.00_32_64.depot

After the initial swinstall, the bundle had two bits of software:

IGNITE -> C.7.16.283 HP-UX Installation Utilities (Ignite-UX) 453020 HP-UX_B.11.00_32/64

Ignite-UX-11-31 -> C.7.16.283 HP-UX Installation Utilities for Installing 11.31 Systems 453020 HP-UX_B.11.00_32/64

Ran the install for the "Ignite-UX-11-31", and it produced the below fileset errors that occur when you try and run a UNIX backup:

# time make_tape_recovery -A
       * Creating local directories for configuration files and archive.

======= 05/28/13 17:36:17 BST Started make_tape_recovery. (Tue May 28
         17:36:17 BST 2013)
         @(#)Ignite-UX Revision C.7.16.283
         @(#)ignite/net_recovery (opt) Revision:
         /branches/IUX_RA1303/ignite/src@85339 Last Modified: 2013-01-18
         09:48:01 +0530 (Fri, 18 Jan 2013)

       * Checking Versions of Ignite-UX filesets
ERROR:   Fileset: "Ignite-UX.BOOT-KRN-11-11" (rev=C.7.7.93) is a different
         version than the rest of Ignite-UX (rev=C.7.16.283). You must
         update all filesets of the product to the same version for
         proper behavior.
ERROR:   Fileset: "Ignite-UX.BOOT-KRN-11-23" (rev=C.7.7.93) is a different
         version than the rest of Ignite-UX (rev=C.7.16.283). You must
         update all filesets of the product to the same version for
         proper behavior.
ERROR:   Fileset: "Ignite-UX.FILE-SRV-11-11" (rev=C.7.7.93) is a different
         version than the rest of Ignite-UX (rev=C.7.16.283). You must
         update all filesets of the product to the same version for
         proper behavior.
ERROR:   Fileset: "Ignite-UX.FILE-SRV-11-23" (rev=C.7.7.93) is a different
         version than the rest of Ignite-UX (rev=C.7.16.283). You must
         update all filesets of the product to the same version for
         proper behavior.
ERROR:   All filesets in the Ignite-UX product must be the same revision.
         Please update any old Ignite-UX filesets.

======= 05/28/13 17:36:17 BST make_tape_recovery completed unsuccessfully

real        0.9
user        0.3
sys         0.1

I assume...that either more Ignite SW is required...or perhaps Ignite needs removing first? Is there a preferred way to remove all of Ignite...assuming that a second attempt at reinstalling would work.

Thanks

P.S. this thread has been moved from HP-UX > System Administration to Ignite - HP Forum Moderator

Re: Ignite C.7.16.283 Install Issue - Different Filesets Errors Post Install

Patrick Wallek — Tue, 28 May 2013 17:16:34 GMT

I have always removed the old Ignite software before installing a new version due to the errors you are seeing.

Re: Ignite C.7.16.283 Install Issue - Different Filesets Errors Post Install

PHSC — Tue, 28 May 2013 17:53:44 GMT

Thanks for that Patrick.

Checked what Ignite SW was on the server:

swlist | grep -i ignite
IGNITE                                   C.7.16.283     HP-UX Installation Utilities (Ignite-UX)
Ignite-UX-11-31               C.7.16.283     HP-UX Installation Utilities forInstalling 11.31 Systems
Ignite-UX                            C.7.7.93       HP-UX System Installation Services

Removed the old version:

swremove Ignite-UX,r=C.7.7.93

======= 05/28/13 18:32:40 BST BEGIN swremove SESSION
         (non-interactive)
       * Session started for user
       * Beginning Selection
       * Target connection succeeded for "bigthree:/".
       * Software selections:
             Ignite-UX.BOOT-KRN-11-11,l=/,r=C.7.7.93,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.93,fa=HP-UX_B.11.11_32/64
             Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.7.93,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.93,fa=HP-UX_B.11.11_32/64
             Ignite-UX.FILE-SRV-11-11,l=/,r=C.7.7.93,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.93,fa=HP-UX_B.11.11_32/64
             Ignite-UX.FILE-SRV-11-23,l=/,r=C.7.7.93,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.93,fa=HP-UX_B.11.11_32/64
       * Selection succeeded.

       * Beginning Analysis
       * Session selections have been saved in the file
         "/.sw/sessions/swremove.last".
       * The analysis phase succeeded for "bigthree:/".
       * Analysis succeeded.

        * Beginning Execution
       * The execution phase succeeded for "bigthree:/".
       * Execution succeeded.

NOTE:    More information may be found in the agent logfile using the command "swjob -a log bigthree-0010 @ bigthree:/".

Now the UNIX backup has ran:

time make_tape_recovery -A
       * Creating local directories for configuration files and archive.

======= 05/28/13 18:36:25 BST Started make_tape_recovery. (Tue May 28
         18:36:25 BST 2013)
         @(#)Ignite-UX Revision C.7.16.283
         @(#)ignite/net_recovery (opt) Revision:
         /branches/IUX_RA1303/ignite/src@85339 Last Modified: 2013-01-18
         09:48:01 +0530 (Fri, 18 Jan 2013)

       * Checking Versions of Ignite-UX filesets
       * Scanning system for IO devices...
WARNING: SIOC_VPD_INQUIRY ioctl failed to retrieve data for control device
         0/7/1/0.0x7.0x0: Invalid argument.
       * Boot device is: 0/4/1/0.0xcad0f826c4caeba.0x0
       * Creating System Configuration.
       * /opt/ignite/bin/save_config -f
         /var/opt/ignite/recovery/2013-05-28,18:36/system_cfg vg00
       * Backing Up Volume Group /dev/vg00
       * /usr/sbin/vgcfgbackup /dev/vg00
       * Creating Map Files for Volume Group /dev/vg00
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

       * Backing Up Volume Group /dev/vg01
       * /usr/sbin/vgcfgbackup /dev/vg01
       * Creating Map Files for Volume Group /dev/vg01
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg01.mapfile /dev/vg01

       * Backing Up Volume Group /dev/vg02
       * /usr/sbin/vgcfgbackup /dev/vg02
       * Creating Map Files for Volume Group /dev/vg02
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg02.mapfile /dev/vg02

       * Creating Control Configuration.
       * Creating Archive File List
       * Creating Archive Configuration

       * /opt/ignite/lbin/make_arch_config -c
         /var/opt/ignite/recovery/2013-05-28,18:36/archive_cfg -g
         /var/opt/ignite/recovery/2013-05-28,18:36/flist -n 2013-05-28,18:36 -r ipf -b 64 -d Recovery\ Archive -t 22 -i 1 -m t
       * Saving the information about archive to
         /var/opt/ignite/recovery/previews
       * Creating The Tape Archive
WARNING: You are about to create an Itanium-based recovery tape. If this
         system does NOT support direct tape boot, you will need to perform
         "two-step media recovery" where the boot media (CD or DVD) has the
         same version of Ignite-UX as the version on this tape.
NOTE:    File: /var/tmp/tmp_cfg_file is not world-readable, this may cause
         clients to fail to read it during an installation.
NOTE:    File: /var/opt/ignite/tmp/9797/cfg is not world-readable, this may
         cause clients to fail to read it during an installation.
NOTE:    File: /var/opt/ignite/tmp/9797/IINSTALLFS is not world-readable, this
         may cause clients to fail to read it during an installation.
       * /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s
         local -n 2013-05-28,18:36 -m t -w
         /var/opt/ignite/recovery/2013-05-28,18:36/recovery.log -u -R -g
         /var/opt/ignite/recovery/2013-05-28,18:36/flist -a 9899650

       * Preparing to create a system archive.

       * Archiving contents of bigthree via tar image to local device /dev/rmt/0mn.
       * Creation of system archive complete.

       * Archive created and rewind the tape to beginning of tape.

       * Cleaning up old configuration file directories

======= 05/28/13 18:44:14 BST make_tape_recovery completed successfully!

real     7:49.1
user       17.3
sys      1:08.1

======= 05/28/13 18:32:46 BST END swremove SESSION (non-interactive)

Re: Ignite C.7.16.283 Install Issue - Different Filesets Errors Post Install

Robert_Jewell — Tue, 28 May 2013 19:51:39 GMT

On a related note, if you have a central Ignite U/X server and wish to keep the version you currently have consistent across the clients or are running the make_net_recovery command you can use the -u option to update the Ignite S/W on the client. From the man page:

           -u   Updates the Ignite-UX software from the Ignite server
                specified by the -s option. This is done only when the
                version of software on the server is newer than the client.
                The software update uses the depot on the server in the
                location: /var/opt/ignite/depots/recovery_cmds. If this
                depot does not exist, you may use the
                /opt/ignite/lbin/pkg_rec_depot command to create it. When
                the -u option causes the software to be updated, it then
                automatically restarts the command with the same options.

-Bob