topic Re: ignite adding client in Operating System - HP-UX

ignite adding client

Aamir14 — Wed, 06 Nov 2013 13:18:03 GMT

hi,

I installed new IGNITE

# swlist -l product|grep -i ignite

Ignite-UX C.7.7.93 HP-UX System Installation Services

# swlist -l depot | grep -i recover

/var/opt/ignite/depots/recovery_cmds

When i install new clients its generating error messages:-------

ERROR swinstall failed to install recovery tools from:

"billdev1:/var/opt/ignite/depots/recovery_cmds

this is my server nfs entry

# more /etc/dfs/dfstab

# place share(1M) commands here for automatic execution

# on entering init state 3.

# share [-F fstype] [ -o options] [-d "<text>"] <pathname>

# .e.g,

# share -F nfs -o rw=engineering -d "home dirs" /home

share -F nfs -o anon=2 /var/opt/ignite/clients

share -F nfs -o anon=2 /var/opt/ignite/depots/recovery_cmds

share -F nfs -o anon=2 /var/opt/ignite/clients/appsdev2

Please suggest me ..................

thanks

aamir

Re: ignite adding client

Torsten. — Wed, 06 Nov 2013 13:26:30 GMT

You should install the Installation Utilities too, looks like this:

Ignite-UX-11-11       C.7.5.142      HP-UX Installation Utilities for Installing 11.11 Systems
Ignite-UX-11-23       C.7.5.142      HP-UX Installation Utilities for Installing 11.23 Systems
Ignite-UX-11-31       C.7.5.142      HP-UX Installation Utilities for Installing 11.31 Systems

Re: ignite adding client

Aamir14 — Wed, 06 Nov 2013 18:44:10 GMT

Hi,

I already installed older version

│ Ignite-UX-11-11 -> C.7.7.93 HP-UX Installation Utili │ │

││ Ignite-UX-11-23 -> C.7.7.93 HP-UX Installation Utili │ │

││ Ignite-UX-11-31 -> C.7.7.93 HP-UX Installation Utili

but still same error

thanks

aamir

Re: ignite adding client

Aamir14 — Thu, 07 Nov 2013 05:55:56 GMT

Hi,

I installed ignite an new server

i added two clents both clients are successsfully installed

but i also add four new clients .but they are not installed properly

its shown ERROR messages

for example:-----

ERROR

rcmd_af: connect: prodpyrl.mpmkvvcl.com connection refused

second error:---

Warning: untrusted X11 forwarding setup failed: xauth key data not
generatedwarning: no xauth data&colon; using fake authentication data for
X11 forwarding.mnr_UI Couldn't bring the initial window. This may
occur when you specify an incorrect display.ERROR:   The interactive
UI failed to start. Check your terminal type.

I already x11 allow on sshd config file:------

X11Forwarding yes

X11DisplayOffset 10

KerberosAuthentication yes

Protocol 2,1

this is my ssh and ignite version:-----

# swlist | grep -i secureshell

SecureShell A.06.20.006 HP-UX Secure Shell

# swlist -l product|grep -i ignite

Ignite-UX C.7.11.444 HP-UX System Installation Services

Server and Clients are same ignite version and enabled X11 forfarding.

Please suggest me what is a actual problem...

Thanks

Aamir

Re: ignite adding client

Aamir14 — Thu, 07 Nov 2013 07:34:44 GMT

Hi,

Also Kindly see the IGNITE logs....

WARNING: Client uatdata1 is waiting for installation. Since the server started

checking, the client's logfile has not been updated in 45 minutes.

The timeout in effect is 20 minutes.

WARNING: Client prodata1 is waiting for installation. Since the server started

checking, the client's logfile has not been updated in 45 minutes.

The timeout in effect is 20 minutes.

ERROR: rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused

======= 11/05/13 17:34:17 IST End HP-UX Install Server

======= 11/06/13 14:50:20 IST Begin HP-UX Install Server

@(#)ignite/ignite user interface (opt) Revision:

/branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23

02:35:40 -0600 (Fri, 23 Jul 2010)

======= 11/06/13 14:50:27 IST Begin HP-UX Install Server

@(#)ignite/ignite user interface (opt) Revision:

/branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23

02:35:40 -0600 (Fri, 23 Jul 2010)

======= 11/06/13 17:50:46 IST Begin HP-UX Install Server

@(#)ignite/ignite user interface (opt) Revision:

/branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23

02:35:40 -0600 (Fri, 23 Jul 2010)

Program completed successfully.

* The system recovery archive for "uatdata2" is "Complete".

* The system recovery archive for "appsdev2.mpmkvvcl.com" is "Complete".

ERROR: rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused

======= 11/06/13 18:05:44 IST End HP-UX Install Server

======= 11/07/13 11:12:52 IST Begin HP-UX Install Server

@(#)ignite/ignite user interface (opt) Revision:

/branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23

02:35:40 -0600 (Fri, 23 Jul 2010)

Program completed successfully.

* The system recovery archive for "uatdata2" is "Complete".

* The system recovery archive for "appsdev2.mpmkvvcl.com" is "Complete".

ERROR: rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused

WARNING: Client uatdata1 is waiting for installation. Since the server started

checking, the client's logfile has not been updated in 20 minutes.

The timeout in effect is 20 minutes.

WARNING: Client prodata1 is waiting for installation. Since the server started

checking, the client's logfile has not been updated in 79 minutes.

The timeout in effect is 20 minutes.

WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not

generatedWarning: No xauth data; using fake authentication data for

X11 forwarding. * Boot device is:

0/6/0/0/0/0/4/0/0/0.0x0.0x4000000000000000

WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not

generatedWarning: No xauth data; using fake authentication data for

X11 forwarding.mnr_ui: Couldn't bring up the initial window. This may

occur whenyou specify an incorrect display.ERROR: The interactive UI

failed to start. Check your terminal type.

======= 11/07/13 12:55:44 IST End HP-UX Install Server

======= 11/07/13 12:55:47 IST Begin HP-UX Install Server

@(#)ignite/ignite user interface (opt) Revision:

/branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23

02:35:40 -0600 (Fri, 23 Jul 2010)

Program completed successfully.

* The system recovery archive for "uatdata2" is "Complete".

* The system recovery archive for "appsdev2.mpmkvvcl.com" is "Complete".

WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not

generatedWarning: No xauth data; using fake authentication data for

X11 forwarding.mnr_ui: Couldn't bring up the initial window. This may

occur whenyou specify an incorrect display.ERROR: The interactive UI

failed to start. Check your terminal type.

WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not

generatedWarning: No xauth data; using fake authentication data for

X11 forwarding.mnr_ui: Couldn't bring up the initial window. This may

occur whenyou specify an incorrect display.ERROR: The interactive UI

failed to start. Check your terminal type.

Thnaks

Aamir

Re: ignite adding client

pradeep m — Tue, 19 Nov 2013 06:53:06 GMT

> ERROR

> rcmd_af: connect: prodpyrl.mpmkvvcl.com connection refused

For the above error message, check the below in the clients with issues

+ Make sure the login and shell are uncommented.

/etc/inetd.conf

/etc/services
# grep login /etc/services
login 513/tcp # remote login

Port 513 needs to be enabled.

If any changes to /etc/inetd.conf are made inetd -c needs to be run for the changes to take effect.