topic Re: ignite in Operating System - HP-UX

ignite

rajesh73 — Fri, 03 Oct 2014 19:12:47 GMT

hi,

i plan to install the ignite latest depot file in hp-ux 11.31

HP-UX_11i_v3_Ignite-UX-11.31_C.7.18.63_HP-UX_B.11.00_32_64.depot

questions

*********

1.i installed the latest deport file in one source server, i need to push the latest depot file to destination server. we have the command but we dont know how to use

#/opt/ignite/bin/ignite

2.how to check the depot file require reboot or not.

Re: ignite

Dennis Handly — Sat, 04 Oct 2014 10:41:26 GMT

>2.how to check the depot file require reboot or not.

See this swlist command:

http://h30499.www3.hp.com/t5/Patches/Command-to-check-whether-a-patch-requires-reboot-or-not/m-p/5116907#M12942

Re: ignite

GregSB — Tue, 28 Apr 2015 14:45:55 GMT

The Ignite-UX product itself does not require a reboot.

If you have the desired version of Ignite-UX already installed on a server, this server can then be used as the swinstall source to upgrade other servers as follows.

Create the depot on the "installed" server using the pkg_rec_depot command.

myserver1# /opt/ignite/lbin/pkg_rec_depot

pkg_rec_depot is nice in that it creates a depot using currently installed files, so the disk space required for the depot is much less. See the pkg_rec_depot manpage for additional info.

Once the depot has been created on the source you can upgrade other servers.

myserver2: swinstall -s myserver1:/var/opt/ignite/depots/recovery_cmds Ignite-UX

After installation use "swlist -l fileset Ignite-UX" to verify the new version and that all filesets are at the same revision.