https://community.hpe.com/t5/operating-system-hp-ux/using-ignite-through-network/m-p/4819985#M497420 <P>Hi list,</P><P>&nbsp;</P><P>I am new to Ignite. I have three blade servers running HPUX and I need to make an exact copy of these 3 blades to another Enclosure, same model and same 3 blades.....just in a different location. I do not have a tape device for this operation, so I have to do it using though the network, using make_net_recovery I suppose.</P><P>&nbsp;</P><P>How can i accomplish that? Could you guys send me a step-by-step procedure on what should I do to get there? I mean everything...</P><P>&nbsp;</P><UL><LI>should I install Ignite on the machines I intend to copy?</LI><LI>do I need an Ignite Server for this taks? If so...where should it be installed...on the very server I need to copy?</LI><LI>Can I simply use a single install session from the client I want to copy?</LI><LI>What pre-reqs should I consider on the target machine, considering I intend to do this through the network?</LI></UL><P>&nbsp;</P><P>Any help is appreciated.</P><P>Mario</P> Sun, 10 Jul 2011 15:21:39 GMT Mario Behring 2011-07-10T15:21:39Z https://community.hpe.com/t5/operating-system-hp-ux/using-ignite-through-network/m-p/4819985#M497420 <P>Hi list,</P><P>&nbsp;</P><P>I am new to Ignite. I have three blade servers running HPUX and I need to make an exact copy of these 3 blades to another Enclosure, same model and same 3 blades.....just in a different location. I do not have a tape device for this operation, so I have to do it using though the network, using make_net_recovery I suppose.</P><P>&nbsp;</P><P>How can i accomplish that? Could you guys send me a step-by-step procedure on what should I do to get there? I mean everything...</P><P>&nbsp;</P><UL><LI>should I install Ignite on the machines I intend to copy?</LI><LI>do I need an Ignite Server for this taks? If so...where should it be installed...on the very server I need to copy?</LI><LI>Can I simply use a single install session from the client I want to copy?</LI><LI>What pre-reqs should I consider on the target machine, considering I intend to do this through the network?</LI></UL><P>&nbsp;</P><P>Any help is appreciated.</P><P>Mario</P> Sun, 10 Jul 2011 15:21:39 GMT https://community.hpe.com/t5/operating-system-hp-ux/using-ignite-through-network/m-p/4819985#M497420 Mario Behring 2011-07-10T15:21:39Z https://community.hpe.com/t5/operating-system-hp-ux/using-ignite-through-network/m-p/4820007#M497421 <P>Hi</P><P>&nbsp;</P><P>You need to Ignite server and load all the O/S releated S/W to it.See attached PDF's.</P><P>&nbsp;</P><P>Regards</P><P>Sri</P> Sun, 10 Jul 2011 17:02:57 GMT https://community.hpe.com/t5/operating-system-hp-ux/using-ignite-through-network/m-p/4820007#M497421 Muthyala 2011-07-10T17:02:57Z