topic Re: Ignite mounting issue. in Operating System - HP-UX

Ignite mounting issue.

fizan — Thu, 21 Jul 2011 02:09:33 GMT

Hi Experts,

We have a ignite setup & in ignite server we have FS exported to all ignite clients in exports tab.

Now we need to restrict it to mount on particluar host only.

Ignite server :

showmount -e

/ignite/arch01/gedkep01                  (everyone)
/ignite/arch01/uxd15                     uxd15,uxd15
/ignite/arch01/uxp24                     (everyone)

# ls -ld /ignite/arch01/uxd15
drwxr-xr-x 2 bin bin 96 Jul 19 11:25 /ignite/arch01/uxd15

Ignite client :

showmount -e

no exported file systems for uxd15

uxd15:/ # showmount -a
uxd15:/ # mkdir /test-ignite
uxd15:/ # mount 41.84.6.10:/ignite/arch01/uxd15 /test-ignite
Permission denied
uxd15:/ #

previously it will show applied for (everyone) == but now we need to restrict as per hostname wise,

so we added only uxd15 servers hostname in exports file in ignite server & try to mount it over the ingintie client but it says permission denied.

/Fizan

Re: Ignite mounting issue.

Dennis Handly — Thu, 21 Jul 2011 09:51:50 GMT

What HP-UX version are you on? What does our exports file look like?

You may need the FQDN for your exports.

Re: Ignite mounting issue.

Turgay Cavdar — Thu, 21 Jul 2011 13:09:42 GMT

Also check uxd15 has the corerct IP set on ignite.

Re: Ignite mounting issue.

Arunabha Banerjee — Thu, 21 Jul 2011 15:22:05 GMT

On the ignite server create and share the archive directory for the client you want to backup

# mkdir -p /var/opt/ignite/recovery/archives/host1
# chown bin:bin /var/opt/ignite/recovery/archives/hostname
# vi /etc/exports
Add the following entries
/var/opt/ignite/clients -anon=2
/var/opt/ignite/recovery/archives/host1 -anon=2,access=host1

# exportfs -av

For HP-UX 11.31 only

# vi /etc/dfs/dfstab
share -F nfs -o ro /opt/ignite/data
share -F nfs -o ro /var/opt/ignite/data
share -F nfs -o anon=2 /var/opt/ignite/clients
share -F nfs -o anon=2 /var/opt/ignite/scripts

share -F nfs -o sec=sys,anon=2,rw=host1 /var/opt/ignite/recovery/archives/host1

Add Ignite clinet entry to /etc/hosts in the Ignite server
# vi /etc/hosts
10.x.x.x host1

Add Ignite server entry to /etc/hosts in the client
10.x.x.x igniteserver

Excute the following command from Ignite Client for taking network backup

# /opt/ignite/bin/make_net_recovery -Av -s igniteserver

Re: Ignite mounting issue.

Arunabha Banerjee — Thu, 21 Jul 2011 15:24:20 GMT

sorry for wrong directory name in my above post it should be as follows

# chown bin:bin /var/opt/ignite/recovery/archives/host1

Re: Ignite mounting issue.

fizan — Fri, 22 Jul 2011 03:35:20 GMT

Hi Arunabh,

The way as recommended dosent work, i put the entry in exports file in ignite server & tried not able to mount says

permission denied, but if i put the (everyone) option its working well.

Re: Ignite mounting issue.

Arunabha Banerjee — Fri, 22 Jul 2011 17:33:28 GMT

Can you please share /etc/exports file.

# cat /etc/exports

Re: Ignite mounting issue.

Dennis Handly — Fri, 22 Jul 2011 20:52:12 GMT

>Can you please share /etc/exports file.

And also /etc/xtab (/etc/dfs/sharetab on 11.31) for the current exported filesystems.