topic Re: Problem with Ignite installation in Operating System - HP-UX

Problem with Ignite installation

VtoK — Fri, 11 Nov 2011 14:20:11 GMT

Hello everybody!

I have a problem while installing Ignite. Does anybody have an idea? See log below:

==========================================

bash-3.2# swinstall -s /oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot IGNITE

======= 11/11/11 17:18:08 WST BEGIN swinstall SESSION
(non-interactive) (jobid=gcrmdbt01-0068)

* Session started for user "root@gcrmdbt01".

* Beginning Selection
* Target connection succeeded for "gcrmdbt01:/".
* Source:
/oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot

* Targets: gcrmdbt01:/
* Software selections:
IGNITE,r=C.7.13.259,a=HP-UX_B.11.00_32/64,v=HP
Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-KRN-11-31,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-SERVICES,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-DOC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-SRC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-DOC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-SRC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-31,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNITE,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-ENG-A-MAN,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-E-MAN,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-S-MAN,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.MGMT-TOOLS,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.RECOVERY,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
* Selection succeeded.

* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* "gcrmdbt01:/": 1 filesets have the selected revision already
installed.
ERROR: "gcrmdbt01:/": The software dependencies for 2 products or
filesets cannot be resolved.
* "gcrmdbt01:/": 1 bundles have the selected revision already
installed.
* The analysis phase failed for "gcrmdbt01:/".
ERROR: "gcrmdbt01:/": 4 filesets were determined to be skipped in
the analysis phase.
WARNING: "gcrmdbt01:/": 1 configure or unconfigure scripts had
warnings.
ERROR: "gcrmdbt01:/": An update to the installed product database or
depot catalog may have errors.
* The execution phase failed for "gcrmdbt01:/".
* Analysis and Execution had errors.

ERROR: More information may be found in the agent logfile using the
command "swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/".

======= 11/11/11 17:18:37 WST END swinstall SESSION (non-interactive)
(jobid=gcrmdbt01-0068)

==========================================

# swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/
======= 11/11/11 09:18:08 GMT BEGIN install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)

* Agent session started for user "root@gcrmdbt01.intra".
(pid=12093)

* Beginning Analysis Phase.
* Source:
gcrmdbt01.intra:/oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot

* Target: gcrmdbt01:/
* Target logfile: gcrmdbt01:/var/adm/sw/swagent.log
* Reading source for product information.
NOTE: The fileset "Ignite-UX.MGMT-TOOLS,r=C.7.13.259" is already
installed. If you wish to reinstall this fileset, change the
"reinstall" option to "true".
* Reading source for file information.
* The installed fileset
"Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.5.142" requires the
fileset "Ignite-UX.BOOT-COMMON-IA,l=/,r=C.7.5.142" as a
corequisite. The new version of the corequisite,
"Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259", does not satisfy the
dependency.
ERROR: The dependencies for fileset
"Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.5.142" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* The installed fileset
"Ignite-UX.BOOT-KRN-11-11,l=/,r=C.7.5.142" requires the
fileset "Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.5.142" as a
prerequisite. The new version of the prerequisite,
"Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259", does not satisfy the
dependency.
ERROR: The dependencies for fileset
"Ignite-UX.BOOT-KRN-11-11,l=/,r=C.7.5.142" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to increase
by 8 Kbytes.
This will leave 729536 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/opt" is estimated to
increase by 377080 Kbytes.
This will leave 3246896 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
increase by 368 Kbytes.
This will leave 8071400 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/usr" is estimated to
increase by 80 Kbytes.
This will leave 1387912 Kbytes of available user disk space
after the installation.
NOTE: The bundle "IGNITE,r=C.7.13.259" is already installed. If you
wish to reinstall this bundle, change the "reinstall" option
to "true".

* Summary of Analysis Phase:
ERROR: Exclude Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259
ERROR: Exclude Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259
ERROR: 2 of 17 filesets had Errors.
* 1 of 17 filesets will be Skipped.
* 14 of 17 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.

* Beginning the Install Execution Phase.
* Filesets: 14
* Files: 385
* Kbytes: 375273
* Installing fileset "Ignite-UX.BOOT-KRN-11-31,r=C.7.13.259" (1
of 14).
* Installing fileset "Ignite-UX.BOOT-SERVICES,r=C.7.13.259" (2
of 14).
* Installing fileset "Ignite-UX.CD-TOOLS,r=C.7.13.259" (3 of
14).
* Installing fileset "Ignite-UX.CD-TOOLS-DOC,r=C.7.13.259" (4 of
14).
* Installing fileset "Ignite-UX.CD-TOOLS-SRC,r=C.7.13.259" (5 of
14).
* Installing fileset "Ignite-UX.DVD-TOOLS,r=C.7.13.259" (6 of
14).
* Installing fileset "Ignite-UX.DVD-TOOLS-DOC,r=C.7.13.259" (7
of 14).
* Installing fileset "Ignite-UX.DVD-TOOLS-SRC,r=C.7.13.259" (8
of 14).
* Installing fileset "Ignite-UX.FILE-SRV-11-31,r=C.7.13.259" (9
of 14).
* Installing fileset "Ignite-UX.IGNITE,r=C.7.13.259" (10 of 14).
* Installing fileset "Ignite-UX.IGNT-ENG-A-MAN,r=C.7.13.259" (11
of 14).
* Installing fileset "Ignite-UX.IGNT-JPN-E-MAN,r=C.7.13.259" (12
of 14).
* Installing fileset "Ignite-UX.IGNT-JPN-S-MAN,r=C.7.13.259" (13
of 14).
* Installing fileset "Ignite-UX.RECOVERY,r=C.7.13.259" (14 of
14).

* Beginning the Configure Execution Phase.
WARNING: Fileset: "Ignite-UX.BOOT-COMMON-IA" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-COMMON-PA" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-KRN-11-11" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-KRN-11-23" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.FILE-SRV-11-11" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.FILE-SRV-11-23" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
NOTE: The definition of user "tftp" exists and will not
be duplicated.
WARNING: The "configure" script for "Ignite-UX" had a warning (exit
code "2"). The script location was
"/var/tmp/BAA012093/catalog/Ignite-UX/pfiles/configure".
* This script had warnings but the execution of this product
will still proceed. Check the above output from the script
for further details.
NOTE: A new version of "/var/opt/ignite/server/ignite.defs" has been
installed on the system.
ERROR: Could not select the software
"Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP".
This software does not exist in the target. You must specify
either the correct target, or the correct software selections.
NOTE: The command "/usr/sbin/swmodify" exited with a status code of
"1". The following is the output from the command:
ERROR: Could not select the software
"Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP".
This software does not exist in the target. You must specify
either the correct target, or the correct software selections.
NOTE: End of command output. Non-zero exit status may or may not be
a failure. Look for additional messages.
ERROR: The swmodify command failed for
Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP.
The configuration process will proceed.
ERROR: Rebuilding the Installed Products Database has failed. You
may need to retry this operation.

* Summary of Execution Phase:
ERROR: Skipped (in analysis) Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259
ERROR: Skipped (in analysis) Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259
ERROR: 2 of 17 filesets had Errors.
* 1 of 17 filesets were Skipped.
* 14 of 17 filesets had no Errors or Warnings.
ERROR: The Execution Phase had errors and warnings. See the above
output for details.

======= 11/11/11 09:18:37 GMT END install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)
#

==========================================

Re: Problem with Ignite installation

Torsten. — Fri, 11 Nov 2011 13:49:55 GMT

ERROR: "gcrmdbt01:/": The software dependencies for 2 products or
filesets cannot be resolved
see the log for details
swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/

Re: Problem with Ignite installation

VtoK — Fri, 11 Nov 2011 14:39:29 GMT

# swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/
======= 11/11/11 09:18:08 GMT BEGIN install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)

* Agent session started for user "root@gcrmdbt01.intra".
(pid=12093)

======= 11/11/11 09:18:37 GMT END install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)
#

==========================================

Re: Problem with Ignite installation

Patrick Wallek — Fri, 11 Nov 2011 14:54:03 GMT

I would 'swremove' the current version of Ignite and then try installing the new version.

I have had better luck that way than by just updating Ignite in place.

Re: Problem with Ignite installation

VtoK — Fri, 11 Nov 2011 14:56:42 GMT

bash-3.2# swremove /oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot IGNITE

======= 11/11/11 18:56:04 WST BEGIN swremove SESSION
(non-interactive) (jobid=gcrmdbt01-0069)

* Session started for user "root@gcrmdbt01".

* Beginning Selection
* Target connection succeeded for "gcrmdbt01:/".
ERROR: Could not remove the software selection
"/oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot";
it is not available from depot or root "gcrmdbt01:/".
* Software selection failed for "gcrmdbt01:/".
* Software selections:
IGNITE,r=C.7.13.259,a=HP-UX_B.11.00_32/64,v=HP
Ignite-UX.BOOT-KRN-11-31,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-SERVICES,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-DOC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-SRC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-DOC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-SRC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-31,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNITE,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-ENG-A-MAN,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-E-MAN,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-S-MAN,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.MGMT-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.RECOVERY,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
* Selection succeeded.

* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swremove.last".
ERROR: "gcrmdbt01:/": The software dependencies for 1 products or
filesets cannot be resolved.
* "gcrmdbt01:/": 1 bundles cannot be removed because not all of
their filesets can be removed.
* The analysis phase failed for "gcrmdbt01:/".
* Analysis had errors.

* Beginning Execution
ERROR: "gcrmdbt01:/": 2 filesets were determined to be skipped in
the analysis phase.
* The execution phase failed for "gcrmdbt01:/".
* Execution had errors.

ERROR: More information may be found in the agent logfile using the
command "swjob -a log gcrmdbt01-0069 @ gcrmdbt01:/".

======= 11/11/11 18:56:10 WST END swremove SESSION (non-interactive)
(jobid=gcrmdbt01-0069)

bash-3.2# swremove IGNITE

======= 11/11/11 18:56:20 WST BEGIN swremove SESSION
(non-interactive) (jobid=gcrmdbt01-0070)

* Session started for user "root@gcrmdbt01".

* Beginning Selection
* Target connection succeeded for "gcrmdbt01:/".
* Software selections:
IGNITE,r=C.7.13.259,a=HP-UX_B.11.00_32/64,v=HP
Ignite-UX.MGMT-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
* Selection succeeded.

* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swremove.last".
ERROR: "gcrmdbt01:/": The software dependencies for 1 products or
filesets cannot be resolved.
* "gcrmdbt01:/": 1 bundles cannot be removed because not all of
their filesets can be removed.
* The analysis phase failed for "gcrmdbt01:/".
* Analysis had errors.

NOTE: More information may be found in the agent logfile using the
command "swjob -a log gcrmdbt01-0070 @ gcrmdbt01:/".

======= 11/11/11 18:56:21 WST END swremove SESSION (non-interactive)
(jobid=gcrmdbt01-0070)

bash-3.2#

Re: Problem with Ignite installation

Torsten. — Fri, 11 Nov 2011 15:00:58 GMT

swremove /oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot IGNITE

this will remove ignite from the depot, not from the system!

Re: Problem with Ignite installation

VtoK — Fri, 11 Nov 2011 15:01:53 GMT

And how to remove from the system?

Re: Problem with Ignite installation

Torsten. — Fri, 11 Nov 2011 16:33:54 GMT

Better run "swremove" as interactive session and mark all Ignite related items for removal.

Re: Problem with Ignite installation

Dennis Handly — Sat, 12 Nov 2011 03:33:06 GMT

>And how to remove from the system?

swremove IGNITE

You may have already removed it when you tried to remove both it and the bogus depot.