topic cat: Cannot write to output. error in Operating System - HP-UX

cat: Cannot write to output. error

afterday — Thu, 07 Jun 2012 00:44:05 GMT

Hi Guys, i getting:

when i run make_sys_images, does it mean i success create the golden image? But why i getting cat: Cannot write to output ?

       * The archive is estimated to reach 6254158 kbytes.
       * Free space on 192.168.x.x:/var/opt/ignite/archives
         after archive should be about 980593 kbytes.

       * Archiving contents of FOO via tar to
192.168.x.x: /var/opt/ignite/archives/FOO.gz.
Error 0
cat: Cannot write to output.
       * Creation of system archive complete.
       * Clean up: Do not interrupt; restoring files, kernel, and transition
         links.

FOO:/tmp/backup #>

Re: cat: Cannot write to output. error

pradeep m — Thu, 07 Jun 2012 06:39:14 GMT

Check if you have enough free space in the filesystem (local or NFS server) to store the system image.

Check syslog.log and bdf output for any errors regarding filesystem full.

If you find the filesystem as full, then free up enough space and run again the make_sys_image script..

Hope this helps...

Re: cat: Cannot write to output. error

pradeep m — Thu, 07 Jun 2012 06:44:55 GMT

For additional help on creating Ignite-UX Golden Images, you can refer the HP Ignite-UX Guided Troubleshooting.

Click here to access HP Ignite-UX Guided Troubleshooting.

Navigation: From HP Ignite-UX Guided Troubleshooting -> Choose "Configuration / How-To Guide" -> Golden Image Creation and Configuration