topic Re: install new client from ignite in Operating System - HP-UX

install new client from ignite

install new client from — Sat, 28 Aug 2010 10:33:12 GMT

hi
I have just mounted new server in datacentre withiut OS and i want to install it from ignit server from another server ignite image .

I am getting below error after boot from lan.

* Loading configuration utility...
* Beginning installation from source: 10.73.4.111
======= 08/28/10 07:08:36 EDT Starting system configuration...
* Configure_Disks: Begin
NOTE: The disk at HW path: 0/0/2/1.6.0 does not exist on the system and was
specified in the configuration for the system. No substitute disk
could be found, so it will be removed from the configuration.
* Will install B.11.00 onto this system.
ERROR: Could not find SYSCMDS for B.11.00. The fileset
Ignite-UX.FILE-SRV-11-00 is probably missing or corrupt. Target disks
have not been disturbed.

The configuration process has incurred an error, would you like
to push a shell for debugging purposes? (y/[n]):

please let us know if you need any more details

Re: install new client from ignite

RajuD — Sun, 29 Aug 2010 11:14:48 GMT

I think there is configuration issue in ignite server.

Re: install new client from ignite

Daniel Leiva — Wed, 27 Mar 2024 11:30:31 GMT

Hi

I think you must download again the last version of Ignite according to the HPUX 11i version you use, and install it.

Check this out:

~~http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1283135395420+28353475&threadId=938718~~

Regards

Daniel

[Moderator edit: The above link is no longer valid.]