topic configure ignite server in Operating System - HP-UX

configure ignite server

subrata biswal — Sun, 03 Oct 2010 16:18:29 GMT

HOW to configure ignite server in hpux 11.00 and 11.11.
Any body can send step by step configuration.

thanks
subrata

Re: configure ignite server

Bill Hassell — Sun, 03 Oct 2010 19:19:00 GMT

Here is a start:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01942660/c01942660.pdf

But you'll eventually need this depending on what you want to accomplish.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01942571/c01942571.pdf

Re: configure ignite server

Ishwar_1 — Sat, 09 Oct 2010 13:24:17 GMT

First Check whether the Ignite-UX Patch is installed on the System IF not Install on it

Command to install Ignite-UX is # swinstall -s /dvdrom Ignite-UX2

1> mkdir /var/opt/ignite/recovery

2> create a filesystem of req size and mount on /var/opt/ignite/recovery

3> cd /var/opt/ignite/recovery
mkdir archives
mkdir goldenimage

4> chown to bin:bin

5> run /opt/ignite/bin/ignite
it will display a window

6> select server setup

7> configure booting ip address --- next

8> use unsed ip in ur nw

9> selct skip dhcp setup -- next--ok

10> selct skip depot config ---next

11> yes =------ finish

12> in /etc/rc.config.d/nfsconf

set the value of NFS_SERVER from 0 to 1
/sbin/init.d/nfgs.server start