topic Re: make_sys_image command failed after pax warning in Operating System - HP-UX

make_sys_image command failed after pax warning

stephen peng — Mon, 24 Jan 2011 15:41:55 GMT

guys,
not seeing this issue recently when I search the forum.
I run
make_tape_recovery -Av -x exclude=/oradata -x exclude=/backup
then:
pax: tmp : Optional ACL entries are not backed up.
pax: home : Optional ACL entries are not backed up.
pax: opt : Optional ACL entries are not backed up.
pax: usr/bin : Optional ACL entries are not backed up.
pax: usr/lib : Optional ACL entries are not backed up.
pax: dev : Optional ACL entries are not backed up.
pax: etc : Optional ACL entries are not backed up.
pax: lost+found : Optional ACL entries are not backed up.
pax: cdrom : Optional ACL entries are not backed up.
pax: mnt : Optional ACL entries are not backed up.
pax: net : Optional ACL entries are not backed up.
pax: core : Optional ACL entries are not backed up.
WARNING: The pax command returned a non-zero exit status (exit status 1)
WARNING: The pax command returned a non-zero exit status (exit status 1)
* Creation of system archive complete
NOTE: The following files are in the list of files that were on the
system, but they are no longer present. These files are not
included in the back-up:
/var/tmp/ign_configure/make_sys_image.log

ERROR: The make_sys_image command failed. The system recovery archive will
not be created.

is this mostly probably caused by pax and I should find some pax patch?

regards
Stephen

Re: make_sys_image command failed after pax warning

Ismail Azad — Mon, 24 Jan 2011 16:24:17 GMT

Hi,

Just a suggestion. Ignite supports tar and cpio also and so do the commands for the utilities. Hope that helps.

Regards
Ismail Azad

Re: make_sys_image command failed after pax warning

Alzhy — Mon, 24 Jan 2011 19:25:33 GMT

Is your IUX and OS patched to current levels?

What happened rescently that resulted in the above?

Re: make_sys_image command failed after pax warning

Steven E. Protter — Mon, 24 Jan 2011 20:03:35 GMT

Shalom Stephen,

You may want to have an -x include statement in your backup.

Ignite is not very useful for backing up more than vg00 or rootdg (vxvm). Limit the scope of the backup.

Taking a look at your ignite version and providing your OS version would be helpful in further diagnosis.

SEP

Re: make_sys_image command failed after pax warning

Dennis Handly — Mon, 24 Jan 2011 20:18:52 GMT

>ERROR: The make_sys_image command failed. The system recovery archive will not be created.
>is this mostly probably caused by pax and I should find some pax patch?

Unfortunately I don't see any obvious pax errors above.

>Ismail: Ignite supports tar and cpio

Hopefully you don't have to go backwards by using these.

Re: make_sys_image command failed after pax warning

stephen peng — Tue, 25 Jan 2011 15:19:20 GMT

thank you for your reply!
is this the ignite version from swlist:
XT100SD B.4.4.12 Ignite-UX Manufacturing Supplement (Reference Only)?because there is no "HP-UX Installation Utilities (Ignite-UX)"item at swlist.
and the os' version is B.11.11. attachment are recovery.logs of that of five years before and of yesterday, both failed.
There are threads at this forum saying I should install some pax patch, and I am not certain about that.
Furthermore, how to use tar and cpio to finish the backup?

Re: make_sys_image command failed after pax warning

Alzhy — Tue, 25 Jan 2011 15:24:43 GMT

Peng,

You have VERY OLD IUX Bits.... Please upgradate your Ignite-UX software sir.

Re: make_sys_image command failed after pax warning

stephen peng — Tue, 25 Jan 2011 15:54:07 GMT

Alzhy,
which version of IUX I should install or upgrade?

regards
Stephen

Re: make_sys_image command failed after pax warning

Alzhy — Tue, 25 Jan 2011 15:58:14 GMT

Whatever is the latest out on the IUX Download Page I guess sir.

Re: make_sys_image command failed after pax warning

georgek_1 — Thu, 03 Feb 2011 05:55:50 GMT

Hello Stephen,

The latest version of Ignite is C.7.11 Ignite-UX C.7.1 and later versions run on HP-UX 11i v1, v2, and v3 servers.

You could download the software from https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

Regards,

George