topic Re: PPU stops after ignite in Operating System - HP-UX

PPU stops after ignite

JA Hegedus — Tue, 16 Feb 2010 15:50:38 GMT

We recently ignited 2 servers and found that PPU nolonger functions after the ignite..
Is this a problem or do I have to do something different with my ignite?

Re: PPU stops after ignite

Steven E. Protter — Tue, 16 Feb 2010 16:43:57 GMT

Shalom,

Please post:

swlist -l product | grep -i ignite

There may be a newer version.

SEP

Re: PPU stops after ignite

JA Hegedus — Tue, 16 Feb 2010 18:37:48 GMT

Ignite-UX C.6.10.97 HP-UX System Installation Services

Re: PPU stops after ignite

Viktor Balogh — Wed, 17 Feb 2010 10:38:21 GMT

install the latest version, it's free:

Product #: IGNITEUXB
Version: C.7.9.261

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

Re: PPU stops after ignite

Viktor Balogh — Wed, 17 Feb 2010 10:43:43 GMT

btw, did you reinstall the PPU software?

This is for PPU v7.x, but IMHO it applies to any version:

http://docs.hp.com/en/5971-4845/5971-4845.pdf

"If your systemâ s operating system is reinstalled with Ignite-UX, ensure that the correct version of HP-UX is used and the
PPU software is reinstalled on every partition."

Re: PPU stops after ignite

JA Hegedus — Fri, 19 Feb 2010 19:06:03 GMT

Nothing else was reinstalled.. The ignites were taken just prior to a patch upgrade.. We found problems with the upgrade and rebuilt the servers with ignite...nothing els