topic Re: The problem about the make_tape_recovery in Operating System - HP-UX

The problem about the make_tape_recovery

kinggogo — Mon, 15 Mar 2010 09:44:10 GMT

Hi everyone:
cut form output:
-------
NOTE: The following files are in the list of files that were on the
system, but they are no longer present. These files are not
included in the back-up:
/var/tmp/ign_configure/make_sys_image.log

WARNING: There was a problem with the list of files/directories to archive.
Input: /var/opt/ignite/recovery/2010-03-11,16:00/flist
The following line(s) had too few/incorrect entries in each of them.
Problem lines:
line: 47 var/opt/OV/share/tmp/OpC/ui/.uiwww.lock.daixin 100200 1193026254 0 0
* Cleaning up old configuration file directories
---------------
My version of ignite is B5725AA B.4.3.91 HP-UX Installation Utilities (Ignite-UX). No other errors.

After I use this tape recovery the system, I used "bdf”command to check my system, I found my directory "/" is not integrated, some files has gone.

Thanks very much.

Re: The problem about the make_tape_recovery

TTr — Mon, 15 Mar 2010 11:28:01 GMT

The note above is a warning not an error. It tells you that a file was there when the tape started but it was not there later on when ignite was writing the tape. It is a temporary file and was deleted by the openview software.

The problem is elsewhere.
Check the command that you used to run the ignite tape and check if you have the latest ignite version.

Re: The problem about the make_tape_recovery

Steven E. Protter — Mon, 15 Mar 2010 16:27:19 GMT

Shalom,

The file itself could be cleaned up.

The Ignite Utilities is three major versions out of date as well.

SEP

Re: The problem about the make_tape_recovery

kinggogo — Tue, 16 Mar 2010 12:23:28 GMT

hi

I use make_tape_reocvery -Av
i know this is just a warning, but i dont understand why after I use this tape recovery the system, my directory "/" is not integrated, some files has gone.

How can i know the latest version of ignite ?
thanks!

Re: The problem about the make_tape_recovery

Patrick Wallek — Tue, 16 Mar 2010 12:30:10 GMT

>>my directory "/" is not integrated,

I don't understand what you mean by this.

>>some files has gone.

Like what? were they in the Ignite backup to begin with?

Re: The problem about the make_tape_recovery

Patrick Wallek — Tue, 16 Mar 2010 12:32:00 GMT

Forgot your question about the Ignite version. The latest is always here:

http://www.hp.com/go/ignite-ux

or

http://h71028.www7.hp.com/enterprise/w1/en/os/hpux11i-system-management-ignite-ux.html?jumpid=ex_r1533_us/en/large/tsg/go_ignite-ux

Re: The problem about the make_tape_recovery

kinggogo — Thu, 25 Mar 2010 02:15:20 GMT

hi Patrick Wallek :

" my directory "/" is not integrated, some files has gone." is means some files in my "/" has disappeared and can't find in my backup tape.

Re: The problem about the make_tape_recovery

kinggogo — Fri, 02 Apr 2010 06:13:01 GMT

i exchange my tape driver.thanks everybaby!