topic Re: Booting server from ignite in Operating System - HP-UX

Booting server from ignite

Vijaykumar_1 — Mon, 07 Jun 2010 12:42:08 GMT

How do i boot a server from ignite and restore?Either on PA-RISC or on Integrity..

Re: Booting server from ignite

Torsten. — Mon, 07 Jun 2010 12:50:15 GMT

There are some dependencies, I suggest to review the manual and the quick start guide on

http://www.hp.com/go/ignite-ux

Re: Booting server from ignite

Bill Costigan — Mon, 07 Jun 2010 16:32:11 GMT

I would read the documents Torsten suggested.

Basically, you should install the same version on ignite on both the client and server.

You'll then have to create the client's directory under /var/opt/ignite/... and NFS export it so that the client can write to it.

Then do a make_net_recovery from the clien to the server.

Next set up the server to support the client's boot. This might mean modifying /etc/inetd.conf, /etc/bootptab, /etc/instal_bootptab depending on the the hardware and OS.

The 'Installing and Administering an Ignite-US Server' document is important because it covers the various options needed.

Re: Booting server from ignite

Ramesh kannan.S — Thu, 10 Jun 2010 01:15:03 GMT

Hi,

I suggest you to read the ignite documents.that will help you alot...