topic Re: Ignite UX shows corrupt in Operating System - HP-UX

Ignite UX shows corrupt

Vic006 — Thu, 05 Nov 2009 14:03:19 GMT

When i do
#swlist -a state -l fileset | grep -i corrupt
Ignite-UX.BOOT-KRN-11-31 corrupt

But my Ignite works fine, am able to do make recover and everything.

Do i have to reinstall ignite or is there any known issues with 11.31

Re: Ignite UX shows corrupt

Burak Topal — Thu, 05 Nov 2009 14:21:06 GMT

Hi,

Is it your ignite-ux server or client?
if it is client you can reinstall it by the command;

swinstall -s :/var/opt/ignite/depots/recovery_cmds \IUX-Recovery

by this command you can also update client's software too.

Re: Ignite UX shows corrupt

Steven E. Protter — Thu, 05 Nov 2009 14:59:20 GMT

Shalom,

I would use swverity to look for corrupt installed depots, not swlist.

swverify actually checks stuff.

I would not reinstall Ignite.

Can you use Ignite to build a new system or clone an 11.31 system? If so you don't h ave a problem.

You might clear the error this way:
swconfigure \*
# as root
SEP

Re: Ignite UX shows corrupt

Scot Bean — Fri, 06 Nov 2009 14:04:52 GMT

Probably had a problem during last Ignite install. Maybe install was interrupted or something.

Can use swverify to find, or look in the /var/adm/sw/swagent.log for when Ignite was last installed, may see why this happened.

May need to install ignite again or run swconfig on it to fix it.

Re: Ignite UX shows corrupt

Vic006 — Fri, 06 Nov 2009 14:44:20 GMT

Well it is a client and i tried both ways, swinstall and swconfig but it failed

* Beginning Analysis
* Session selections have been saved in the file
"/root/.sw/sessions/swconfig.last".
* "client:/": 17 filesets have already been configured.
ERROR: ":/": 1 software selection(s) are corrupt.
* The analysis phase failed for ":/".
* Analysis had errors.

I ll try reinstalling.

Re: Ignite UX shows corrupt

Dennis Handly — Sun, 08 Nov 2009 06:04:12 GMT

>I'll try reinstalling.

If that doesn't work, try swremove first.