topic Re: Ignite UX in Operating System - HP-UX

Ignite UX

K.P.Ranjith — Wed, 11 Nov 2009 01:37:02 GMT

I have Ignite server setup with version c7.9.260 and client at C.7.6.98 version. I get the following error when add cleint from Ignite Server "Can not retrieve Ignite-Ux version from "Severname" ".

Re: Ignite UX

Johnson Punniyalingam — Wed, 11 Nov 2009 01:51:00 GMT

Ignite Server = version c7.9.260
client version = C.7.6.98

>>"Can not retrieve Ignite-Ux version from "Severname" "<<

offcourse the above error is correct,

You need to upgrade you ignite client version to same as the your ignite server,

should resolve your problem

Re: Ignite UX

Julian Foster — Thu, 12 Nov 2009 05:13:13 GMT

I have personally been biten by this before, I always use the same level of ignite on both the server and the target; use the make_medialif command to burn a boot disk if there is not an exiting install that you can use on the target to register the target with your ignite server and have it "boot client" for you.

Re: Ignite UX

Julian Foster — Thu, 12 Nov 2009 05:18:37 GMT

I was wrong above its, make_media_install (see page 260 here http://docs.hp.com/en/5992-6584/5992-6584.pdf) Sorry, its late and Im sleepy hehe