topic Re: restore in Operating System - HP-UX

restore

A.G.M. Velthof — Tue, 08 Dec 2009 08:29:18 GMT

We are testing a restore of a 11.31 IA client from an Igniteserver but getting an error.
It seems that the Igniteserver must at least have UX version 11.31.
Is that correct, or is there a way to restore a 11.31 client from a 11.23 igniteserver.

Thanks, Alfons

Re: restore

Torsten. — Tue, 08 Dec 2009 08:33:27 GMT

The ignite server can be 11.11, 11.23 or 11.31 with a current ignite version.

Re: restore

A.G.M. Velthof — Tue, 08 Dec 2009 08:45:44 GMT

I think You misunderstood.
The Igniteserver makes the backups just fine.
However when I try to restore it says:

ERROR: The version of HP-UX you have chosen to install on the system (B.11.31) is not supported by the version of the Ignite-UX install kernel that the system booted (B.11.23).

Re: restore

Michal Kapalka (mikap) — Tue, 08 Dec 2009 08:50:12 GMT

hi,

check this thread:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1260262130178+28353475&threadId=1315138

mikap

Re: restore

Torsten. — Tue, 08 Dec 2009 08:55:59 GMT

What version do you have?

https://h20293.www2.hp.com/portal/swdepot/try.do?productNumber=IGNITEUXB

current is C.7.9.261

Maybe you have a config problem, you boot the client from an 11.23 install kernel ...

Re: restore

A.G.M. Velthof — Tue, 08 Dec 2009 12:08:03 GMT

Thanks Torsten.

we just had to install the 11.31 part on the igniteserver. As simple as that, but we forgot.........

Regards, Alfons