HP-UX Booting problem

SYLLA_1 — Thu, 10 Dec 2009 12:48:10 GMT

How Can I fix the HP-UX booting when the sytem stops at :
configure all unconfigure software filesets (wait/Busy)?
see the rc logfile.
-------------------------------------------
***************************************************************
HP-UX Start-up in progress
Wed Dec 9 22:31:21 WAT 2009

*****************************************************************

Configure system crah dumps
Output from "/sbin/rc1.d/S080crasconf start":
------------------------------
EXIT CODE: 0

Mount File systems
Output from "/sbin/rc1.d/S100localmount start:
------------------------------
mountall:cannot mount /dev/datavg06/lvol01
mountall:diagnostics from mount
vxfs mount: /dev/datavg06/lvol01 is corrupted.needs cheking
checking quotas

update kernel a "/sbib/rc1.d/S110kmbuild start":
----------------------------------

"/sbib/rc1.d/S110kmbuild start" SKIPPED

Initialize loadable modules
output from "/sbin/rc1.d/S112kminit start":
-----------------------------------
*All configured modules successfully.
NOTE: Modume status

name

ID
Status

Type
=============================================================================
krm 1 UNLOADED
WSIO

Setting hostname
output from "/sbin/rc1.d/S320hostname start":
--------------------------------------

Set privilege group
output from "/sbin/rc1.d/S400set_prvgr start":
--------------------------------------
"/sbin/rc1.d/S400set_prvgr start" SKIPPED

Display date
Outtput from "/sbin/rc1.d/S420set_date start":
---------------------------------------
"/sbin/rc1.d/S420set_date start" SKIPPED

copy processor logs to /var/tombstones
output from " /sbin/rc1.d/S430pdcinfo start":
----------------------------------------

save systemcrash dump if needed
output from "/sbin/rc1.d.S440savecrash start":
----------------------------------------
savecrash directory not set; sefaulting to: /var/adm/crah
savecrash: Dump previously saved, use -r to resave

EXIT CODE: 2- savecrash found no core dump to save
"/sbin/rc1.d.S440savecrash start" SKIPPED

Enable auxliary swap space
output from "/sbin/rc1.d/S500swap_start start":
Enabling device paging on /dev/vg00/lvol9.
swap active

Start syncer daemon
output from "/sbin/rc2.d/S520syncer start":
------------------------------------------
syncer started

configure HP Fibre Channel interfaces
output from "/sbin/rc2.d/S006hpfc start ":

ERROR: lo0 interface: ifconfig: chek plumbing error: Bad file number
invalid tunable names, tcp_time_wait_intreval for this modules,
for names, use name '?'
invalid tunable names, tcp_wroff_xtra for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_old_urp_interpretation for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_keepalives_kill for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_conn_request_mas for this modules
for a list of valid names, use name '?'
invalid tunable names, tcp_ip_abort_cinterval for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_ip_abort_interval for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_rexmit_interval_min for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_ip_abort_cinterval for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_ip_ttl for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_wroff_extra for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_pass_up_icmp for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_pass_up_option for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_def_ttl for this modules,
for a list of valid names, use name '?'
ERROR: Failed to set ndd tunable parameters
"/sbin/rc2.d/S008net.init start" FAILED

Start software Distrubtor agent deamont
output from "/sbin/rc2.d/S100swagent start":
---------------------------------------------
ERROR: swagentd exiting du to initialization. check the logfile "var/admin/sw/swagend start"
for more information
"/sbin/rc2.d/S100swagentd start" FAILED

configuring all unconfigured software filesets
output from /"sbin/rc2.d/S120swconfig start":
--------------------------------------------
* Removing the following software:
Obselete.NCSNCK,1=/,r=B.11.00, a=HP-UX_B.11.00

Re: HP-UX Booting problem

V. Nyga — Thu, 10 Dec 2009 13:16:28 GMT

Hi,

I would start at the top:

>Mount File systems
>Output from "/sbin/rc1.d/S100localmount >start:
>------------------------------
>mountall:cannot mount /dev/datavg06/lvol01
>mountall:diagnostics from mount
>vxfs mount: /dev/datavg06/lvol01 is >corrupted.needs cheking
>checking quotas

Go into single user mode and check the disk of:
/dev/datavg06/lvol01

Disk could be gone bad ....

Volkmar

Re: HP-UX Booting problem

Torsten. — Thu, 10 Dec 2009 13:17:13 GMT

After installing patches or other software and a reboot the system needs to configure them.

This is normal and can take a while.

But you have a problem with network, so the sw processes cannot start and cannot configure.

Reboot the server, go to single user mode and fix your networking problem. Once this is done, boot up normally and let swconfig configure.

Re: HP-UX Booting problem

SYLLA_1 — Thu, 10 Dec 2009 20:15:13 GMT

thanks a lot for the reply, but how to fix the
lo0 loopback configuration and start the swagentd?

Re: HP-UX Booting problem

Steven E. Protter — Thu, 10 Dec 2009 20:46:48 GMT

Shalom,

ifconfig: chek plumbing error: Bad file number
invalid tunable names, tcp_time_wait_intreval for this modules,
for names, use name '?'

Indicates s network problem.

Check /etc/rc.config.d/netconf for errors.

Do not keep backups netconf in that directory.

SEP

topic HP-UX Booting problem in Operating System - HP-UX

HP-UX Booting problem

Re: HP-UX Booting problem

Re: HP-UX Booting problem

Re: HP-UX Booting problem

Re: HP-UX Booting problem