<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: ignite writetapedb error in Operating System - HP-UX</title>
    <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139453#M502099</link>
    <description>It looks like a tape write error. Check the tape for write protect and good condition. ALso check the drive itself. Have you tried a different tape or tried to write something to this tape using a simple tar?&lt;BR /&gt;On another note see if there are upgrades to your ignite version. There is something wrong in the /opt/ignite/bin/save_config file in line 20 where those syntax errors occur.</description>
    <pubDate>Wed, 05 Nov 2008 16:30:35 GMT</pubDate>
    <dc:creator>TTr</dc:creator>
    <dc:date>2008-11-05T16:30:35Z</dc:date>
    <item>
      <title>ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139452#M502098</link>
      <description>Hi folks,&lt;BR /&gt;&lt;BR /&gt;im trying to figure out why my backup fails with the following error...any of you seen this message before?&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;root@hsapw3 [/hq/applprod_nfs/log/or]# /opt/ignite/bin/make_tape_recovery -x inc_entire=vg00 -x exclude=/var/adm/sw -x exclude=/oracle -x exclude=/tmp -x exclude=/usr/sap -P s -d /dev/rmt/0mn -I -v&lt;BR /&gt;       * Creating local directories for configuration files and archive.&lt;BR /&gt;&lt;BR /&gt;=======  11/05/08 11:10:37 EST  Started /opt/ignite/bin/make_tape_recovery.&lt;BR /&gt;         (Wed Nov 05 11:10:37 EST 2008)&lt;BR /&gt;         @(#)Ignite-UX Revision C.7.3.148&lt;BR /&gt;         @(#)ignite/net_recovery (opt) Revision:&lt;BR /&gt;         /branches/IUX_RA0709w/ignite/src@71360 Last Modified: 2007-08-24&lt;BR /&gt;         09:42:50 -0600 (Fri, 24 Aug 2007)&lt;BR /&gt;&lt;BR /&gt;       * Testing for necessary pax patch.&lt;BR /&gt;       * Recovery Archive Description = /dev/rmt/0mn&lt;BR /&gt;&lt;BR /&gt;       * Recovery Archive Location    = /dev/rmt/0mn&lt;BR /&gt;&lt;BR /&gt;       * Number of Archives to Save   = 2&lt;BR /&gt;&lt;BR /&gt;       * Pax type  = tar&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;        In?     dsk/vg  name                    minor#  Associated disks/mountpoints&lt;BR /&gt;        1       v       /dev/vg00               0x00    /dev/disk/disk3_p2 /dev/disk/disk5_p2&lt;BR /&gt;                                                /dev/vg00/lvol1 /stand  2&lt;BR /&gt;                                                /dev/vg00/lvol2&lt;BR /&gt;                                                /dev/vg00/lvol3 /       2&lt;BR /&gt;                                                /dev/vg00/lvol4 /tmp    0&lt;BR /&gt;                                                /dev/vg00/lvol5 /home_local     2&lt;BR /&gt;                                                /dev/vg00/lvol6 /opt    2&lt;BR /&gt;                                                /dev/vg00/lvol7 /usr    2&lt;BR /&gt;                                                /dev/vg00/lvol8 /var    1&lt;BR /&gt;                                                /dev/vg00/lvolswap1&lt;BR /&gt;                                                /dev/vg00/lvolswap2&lt;BR /&gt;                                                /dev/vg00/lvolswap3&lt;BR /&gt;                                                /dev/vg00/lvoldump1&lt;BR /&gt;                                                /dev/vg00/lvol9 /hq     2&lt;BR /&gt;                                                /dev/vg00/lvoracle      /oracle 0&lt;BR /&gt;                                                /dev/vg00/lvsapmnt      /sapmnt 2&lt;BR /&gt;                                                /dev/vg00/lvusrsap      /usr/sap        0&lt;BR /&gt;                                                /dev/vg00/lvauditpri    /.secure/pri    2&lt;BR /&gt;                                                /dev/vg00/lvauditaux    /.secure/aux    2&lt;BR /&gt;                                                /dev/vg00/lvexporthome  /export/home    2&lt;BR /&gt;        0       v       /dev/vgPW7              0x02    /dev/disk/disk54 /dev/disk/disk58 /dev/disk/disk62 /dev/disk/disk65 /dev/disk/disk51 /dev/disk/disk61 /dev/disk/disk63 /dev/disk/disk64 /dev/disk/disk55 /dev/disk/disk57 /dev/disk/disk59 /dev/disk/disk60 /dev/disk/disk53 /dev/disk/disk50 /dev/disk/disk69 /dev/disk/disk78 /dev/disk/disk79 /dev/disk/disk81 /dev/disk/disk84 /dev/disk/disk96 /dev/disk/disk116 /dev/disk/disk118 /dev/disk/disk120 /dev/disk/disk121 /dev/disk/disk123 /dev/disk/disk122 /dev/disk/disk117 /dev/disk/disk119 /dev/dsk/c30t0d6 /dev/dsk/c18t0d6 /dev/dsk/c20t1d0 /dev/dsk/c14t1d0 /dev/dsk/c28t1d0 /dev/dsk/c16t1d0 /dev/dsk/c24t1d1 /dev/dsk/c12t1d1 /dev/dsk/c22t0d7 /dev/dsk/c10t0d7 /dev/dsk/c26t0d5 /dev/dsk/c48t0d5&lt;BR /&gt;                                                /dev/vgPW7/lvoriglogA   /oracle/PW7/origlogA    0&lt;BR /&gt;                                                /dev/vgPW7/lvoriglogB   /oracle/PW7/origlogB    0&lt;BR /&gt;                                                /dev/vgPW7/lvmirrlogA   /oracle/PW7/mirrlogA    0&lt;BR /&gt;                                                /dev/vgPW7/lvmirrlogB   /oracle/PW7/mirrlogB    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata1   /oracle/PW7/sapdata1    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata2   /oracle/PW7/sapdata2    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata3   /oracle/PW7/sapdata3    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata4   /oracle/PW7/sapdata4    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata5   /oracle/PW7/sapdata5    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdatatemp        /oracle/PW7/sapdatatemp 0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata6   /oracle/PW7/sapdata6    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata7   /oracle/PW7/sapdata7    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata8   /oracle/PW7/sapdata8    0&lt;BR /&gt;                                                /dev/vgPW7/lvsapdata9   /oracle/PW7/sapdata9    0&lt;BR /&gt;        0       v       /dev/vgPW7FIXE          0x01    /dev/disk/disk56 /dev/disk/disk67 /dev/disk/disk68 /dev/disk/disk72 /dev/disk/disk87 /dev/disk/disk90 /dev/disk/disk93&lt;BR /&gt;                                                /dev/vgPW7FIXE/lvsapmnt /sapmnt/PW7     0&lt;BR /&gt;                                                /dev/vgPW7FIXE/lvusrsap /usr/sap/PW7    0&lt;BR /&gt;                                                /dev/vgPW7FIXE/lvoracle /oracle/PW7     0&lt;BR /&gt;                                                /dev/vgPW7FIXE/lvoraarch        /oracle/PW7/oraarch     0&lt;BR /&gt;                                                /dev/vgPW7FIXE/lvsaparch        /oracle/PW7/saparch     0&lt;BR /&gt;                                                /dev/vgPW7FIXE/lvsapreorg       /oracle/PW7/sapreorg    0&lt;BR /&gt;&lt;BR /&gt;        ** 0 - The Volume Group or Filesystem is Not included in the&lt;BR /&gt;               System Recovery Archive&lt;BR /&gt;        ** 1 - The Volume Group or Filesystem is Partially included in the&lt;BR /&gt;               System Recovery Archive&lt;BR /&gt;        ** 2 - The Volume Group or Filesystem is Fully included in the&lt;BR /&gt;               System Recovery Archive&lt;BR /&gt;&lt;BR /&gt;       * Checking Versions of Ignite-UX filesets&lt;BR /&gt;       * Creating System Configuration.&lt;BR /&gt;       * /opt/ignite/bin/save_config -f&lt;BR /&gt;         /var/opt/ignite/recovery/2008-11-05,11:10/system_cfg vg00&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;/opt/ignite/bin/save_config[20]: 12 + 4^J21^J21^J21^J21^J21^J21^J21^J21^J21^J21 - 1: Syntax error&lt;BR /&gt;       * Backing Up Volume Group /dev/vg00&lt;BR /&gt;       * /usr/sbin/vgcfgbackup /dev/vg00&lt;BR /&gt;       * Creating Map Files for Volume Group /dev/vg00&lt;BR /&gt;       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00&lt;BR /&gt;&lt;BR /&gt;       * Backing Up Volume Group /dev/vgPW7&lt;BR /&gt;       * /usr/sbin/vgcfgbackup /dev/vgPW7&lt;BR /&gt;       * Creating Map Files for Volume Group /dev/vgPW7&lt;BR /&gt;       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgPW7.mapfile /dev/vgPW7&lt;BR /&gt;&lt;BR /&gt;       * Backing Up Volume Group /dev/vgPW7FIXE&lt;BR /&gt;       * /usr/sbin/vgcfgbackup /dev/vgPW7FIXE&lt;BR /&gt;       * Creating Map Files for Volume Group /dev/vgPW7FIXE&lt;BR /&gt;       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgPW7FIXE.mapfile&lt;BR /&gt;         /dev/vgPW7FIXE&lt;BR /&gt;&lt;BR /&gt;       * Creating Control Configuration.&lt;BR /&gt;       * Creating Archive File List&lt;BR /&gt;       * Creating Archive Configuration&lt;BR /&gt;&lt;BR /&gt;       * /opt/ignite/lbin/make_arch_config -c&lt;BR /&gt;         /var/opt/ignite/recovery/2008-11-05,11:10/archive_cfg -g&lt;BR /&gt;         /var/opt/ignite/recovery/2008-11-05,11:10/flist -n 2008-11-05,11:10 -r&lt;BR /&gt;         ipf -b 64 -d /dev/rmt/0mn -t 22 -i 2 -m t&lt;BR /&gt;       * Saving the information about archive to&lt;BR /&gt;         /var/opt/ignite/recovery/previews&lt;BR /&gt;       * Creating The Tape Archive&lt;BR /&gt;       * Checking configuration file for Syntax&lt;BR /&gt;WARNING: You are about to create an Itanium-based recovery tape.  If this&lt;BR /&gt;         system does NOT support direct tape boot, you will need to perform&lt;BR /&gt;         "two-step media recovery" where the boot media (CD or DVD) has the&lt;BR /&gt;         same version of Ignite-UX as the version on this tape.&lt;BR /&gt;ERROR:   "writetapedb" command failed to create boot tape descriptor block.&lt;BR /&gt;ERROR:   System Error, /opt/ignite/bin/make_ipf_tape failed creating IPF boot&lt;BR /&gt;         tape.&lt;BR /&gt;ERROR:   Failed to generate LIF on tape.&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;=======  11/05/08 11:11:28 EST  make_tape_recovery completed unsuccessfully&lt;BR /&gt;&lt;BR /&gt;thx&lt;BR /&gt;</description>
      <pubDate>Wed, 05 Nov 2008 16:16:12 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139452#M502098</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-05T16:16:12Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139453#M502099</link>
      <description>It looks like a tape write error. Check the tape for write protect and good condition. ALso check the drive itself. Have you tried a different tape or tried to write something to this tape using a simple tar?&lt;BR /&gt;On another note see if there are upgrades to your ignite version. There is something wrong in the /opt/ignite/bin/save_config file in line 20 where those syntax errors occur.</description>
      <pubDate>Wed, 05 Nov 2008 16:30:35 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139453#M502099</guid>
      <dc:creator>TTr</dc:creator>
      <dc:date>2008-11-05T16:30:35Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139454#M502100</link>
      <description>Hi,&lt;BR /&gt;&lt;BR /&gt;My first suspect would be media. Have you tried change the media?</description>
      <pubDate>Wed, 05 Nov 2008 16:32:05 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139454#M502100</guid>
      <dc:creator>Ganesan R</dc:creator>
      <dc:date>2008-11-05T16:32:05Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139455#M502101</link>
      <description>I updated my system on the 19 oct 2008, when I checked the logs, those errors @ line 20 were present but the backup seemed to complete without any errors.....I tried to tar /var on to tape without any problems either....</description>
      <pubDate>Wed, 05 Nov 2008 16:34:11 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139455#M502101</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-05T16:34:11Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139456#M502102</link>
      <description>yes, I will try to change the tape and see what gives.</description>
      <pubDate>Wed, 05 Nov 2008 16:35:10 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139456#M502102</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-05T16:35:10Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139457#M502103</link>
      <description>George,&lt;BR /&gt;&lt;BR /&gt;The problem is not your tape drive or media.  What you are seeing are two separate defects in the make_tape_recovery infrastructure, one in save_config (the syntax errors) and another in writetapedb.  Both have been fixed, and you can download the latest version of Ignite from &lt;A href="http://docs.hp.com/en/IUX." target="_blank"&gt;http://docs.hp.com/en/IUX.&lt;/A&gt;&lt;BR /&gt;&lt;BR /&gt;Best Regards,&lt;BR /&gt;&lt;BR /&gt;Al&lt;BR /&gt;</description>
      <pubDate>Wed, 05 Nov 2008 23:01:19 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139457#M502103</guid>
      <dc:creator>Al Miller_1</dc:creator>
      <dc:date>2008-11-05T23:01:19Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139458#M502104</link>
      <description>Hey Al,&lt;BR /&gt;&lt;BR /&gt;the thing that bothers me is that it worked before the patch with the errors reagding save_config.....</description>
      <pubDate>Thu, 06 Nov 2008 15:27:33 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139458#M502104</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-06T15:27:33Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139459#M502105</link>
      <description>George,&lt;BR /&gt;&lt;BR /&gt;Which patch are you referring to?  The writetapedb ERROR was caused by an uninitialized variable coding defect involving the "errno" variable.  There was a patch, I have forgotten which one, that when applied caused errno to be non-zero at program startup, and this exposed the defect in writetapedb.&lt;BR /&gt;&lt;BR /&gt;The bottom line is that if you install Ignite-UX C.7.4 or later (current is  C.7.7) this problem should go away.&lt;BR /&gt;&lt;BR /&gt;Al&lt;BR /&gt;</description>
      <pubDate>Thu, 06 Nov 2008 15:36:55 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139459#M502105</guid>
      <dc:creator>Al Miller_1</dc:creator>
      <dc:date>2008-11-06T15:36:55Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139460#M502106</link>
      <description>Hi George,&lt;BR /&gt;&lt;BR /&gt;I noticed this option:&lt;BR /&gt;&lt;BR /&gt;-x exclude=/var/adm/sw &lt;BR /&gt;&lt;BR /&gt;This is IMHO a very bad idea, because without the sw database you are no longer able to install/change/remove **any** software!</description>
      <pubDate>Thu, 06 Nov 2008 15:38:45 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139460#M502106</guid>
      <dc:creator>Torsten.</dc:creator>
      <dc:date>2008-11-06T15:38:45Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139461#M502107</link>
      <description>let me clarify the previous statement....backups were doing fine until I installed patches on the server....when I look at the old logs the errors regarding the syntax errors were present but nonetheless the backup would still complete successfully&lt;BR /&gt;&lt;BR /&gt;</description>
      <pubDate>Thu, 06 Nov 2008 15:41:13 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139461#M502107</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-06T15:41:13Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139462#M502108</link>
      <description>regarding the /var/adm/sw, we back it up via dataprotector....if we need to recover something after recovery would could always restore....</description>
      <pubDate>Thu, 06 Nov 2008 15:43:28 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139462#M502108</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-06T15:43:28Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139463#M502109</link>
      <description>I removed previous versions of ignite and installed the latest one...Everything seems to work well now.&lt;BR /&gt;&lt;BR /&gt;thx</description>
      <pubDate>Fri, 07 Nov 2008 14:45:58 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139463#M502109</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-07T14:45:58Z</dc:date>
    </item>
    <item>
      <title>Re: ignite writetapedb error</title>
      <link>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139464#M502110</link>
      <description>suggestion by Al fixed my issue</description>
      <pubDate>Fri, 07 Nov 2008 14:48:13 GMT</pubDate>
      <guid>https://community.hpe.com/t5/operating-system-hp-ux/ignite-writetapedb-error/m-p/5139464#M502110</guid>
      <dc:creator>George Barbitsas</dc:creator>
      <dc:date>2008-11-07T14:48:13Z</dc:date>
    </item>
  </channel>
</rss>

