topic Ignite Client Issue in Operating System - HP-UX

Ignite Client Issue

UVA — Thu, 14 Aug 2008 06:24:34 GMT

Hello Gurus,

I created a ignite server, i exported a client
image using the make_net_recovery command.

Howevre when i try to boot the client for reinstallion from the ignite servere, it gives following error,

The command "/opt/ignite/bin/bootsys -wv -S -R B.11.31 nakbqas1 2>/var/tmp/baa014010" will be used to reboot nakbqas1. Would you
like to proceed?

ERROR: Secure mode was specified, but no RSA or DSA public key files
could be found. You may need to use ssh-keygen(1) to create
a public/private key pair

Any hints are there?

Re: Ignite Client Issue

Steven E. Protter — Thu, 14 Aug 2008 06:29:41 GMT

Shalom,

YAY!

Ignite is finally using ssh instead of insecure transport services.

ssh-keygen -t dsa

This will generate public key files which must be exchanged on both servers as authorized_keys files

More on this:

http://www.hpux.ws/?p=19

SEP

Re: Ignite Client Issue

UVA — Thu, 14 Aug 2008 07:47:53 GMT

Hi

Thanks steve, when using GUI for this it asks

for copying the the key.

So it is ok.

Re: Ignite Client Issue

UVA — Thu, 14 Aug 2008 11:10:01 GMT

Hi,

I created a recovery image of vg00 by using following command

make_net_recovery -s nakgdev1 -a nakgdev1:/ignite -x inc_entire=vg00

after completion, this recovery image size shows only 3 gb, but my vg00 actual size is 130 gb

can any one clear my doubt

Re: Ignite Client Issue

Bill Hassell — Thu, 14 Aug 2008 11:21:14 GMT

You can be sure that everything was copied by counting the number of files and directories on the source and the destination. Use the find command:

find / -type f | wc -l
find / -type d | wc -l

Be sure you count the same set of files. For instance, if you used the option -x inc_entire=vg00, then other filesystems on vg01, etc will not be included.