Ignite migrate from rx2620 to bl860

Shift Support — Fri, 12 Sep 2008 19:20:20 GMT

Have successfully migrated UX 11.23 from an RX2600 to a BL860. Utilized make-net-recovery and then ignite to restore to new bl860. Tried the same process with a RX2620. After the recovery the reboot starts, kernel loads Memory stats shown and system hangs. The recovery shows the error below on the kernel build. Any ideas on how to diagnose the cause?

Thanks

* Build_Kernel: Begin
WARNING: Ignite-UX krs_registry_merge load registry file failed:
/stand/krs/system.krs (17)
* Building a new kernel using the command: "/usr/sbin/mk_kernel -f -o
/stand/vmunix".

The reboot looks like this:

Booting kernel...

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 49121 MB 49121 MB 49121 MB
Kernel : 49121 MB 49121 MB 49121 MB
User : 46043 MB 40128 MB 40286 MB
-------------------------------------------------------------------------

Re: Ignite migrate from rx2620 to bl860

Tim Nelson — Fri, 12 Sep 2008 19:24:13 GMT

IMHO, you got lucky with the first one.

Using ignite to clone to diparaging HW is a matter of luck.

Make sure you have all the latest patches on the rx2620 especially Enablement patches.

topic Ignite migrate from rx2620 to bl860 in Operating System - HP-UX

Ignite migrate from rx2620 to bl860

Re: Ignite migrate from rx2620 to bl860