topic Re: Ignite Increasing Disk used in Operating System - HP-UX

Ignite Increasing Disk used

Mykeey_1 — Sun, 17 Aug 2008 20:17:31 GMT

Sorry if this is a repeat question. But I need help figuring out how to let ignite use more available local disks to fully restore a system. For example if the system that was backed up via Ignite has a vg00 of size 84GB and I have 3 36 GB drives, how do I let Ignite go ahead and use the two other drives automatically without my intervetion? I am trying to do things automatically, less intervention the better.

Thanks in advanced.

Michael

Re: Ignite Increasing Disk used

Ivan Krastev — Sun, 17 Aug 2008 21:10:59 GMT

Check this document - Ignite-UX Custom Configuration Files http://docs.hp.com/en/5992-1999/5992-1999.pdf

At page 129 there is more explained - 'Configuration for volume and disk groups'

regards,
ivan

Re: Ignite Increasing Disk used

Deepak Kr — Sun, 17 Aug 2008 23:35:01 GMT

How you have taken backup

using ignite_net_recovery or make_tape_recovery?

Re: Ignite Increasing Disk used

SKR_1 — Mon, 18 Aug 2008 15:12:43 GMT

You need to extend your VG00 with more disks so that you can extend the FS where to keeping the ignite backup of any server.

Thanks

SKR

Re: Ignite Increasing Disk used

Mykeey_1 — Tue, 19 Aug 2008 21:17:21 GMT

Ivan,

thanks for the pointer i will look into it.

Kumar,

I used ignite_net_recovery to backup the system.

The system being backed up are not standard. Some have 2 36GB drives or 4 8gb drives or 1 72GB drive And what I am facing is the difficulty of igniting the system without my intervention. My system has 2 18GB drives. I will continue researching. I dont want to have to interact with the gui.

Re: Ignite Increasing Disk used

Andrew Rutter — Tue, 19 Aug 2008 21:38:11 GMT

hi,

read this doc and look at the custom config files chapter

http://docs.hp.com/en/5992-3336/ch10s01.html#v1502852

you will basically have to create a custom configuration stanza in #/var/opt/ignite/config.local or seperate file but include this in the /var/opt/ignite/index file.

will take abit of working out though if all systems are different.

Andy

Re: Ignite Increasing Disk used

Mykeey_1 — Fri, 10 Oct 2008 03:48:38 GMT

Thanks Andy for your reply. It will help but as you mentioned it will take awhile since the systems will vary.

Re: Ignite Increasing Disk used

Mykeey_1 — Fri, 10 Oct 2008 03:49:25 GMT

Will need to further investigate got a good doc to read up on.