topic Re: golden image in Operating System - HP-UX

golden image

freddy_21 — Wed, 31 Oct 2007 01:02:37 GMT

hello all,

i have problem when create make_sys_image.

i got error:
* Preparing to create a system archive.
* Testing for necessary pax patch.
* Passed pax tests.

WARNING: CLEAN_LEVEL set to 2: (see -l option for make_sys_image(1M))
While this command is executing at clean level 2, the system
should be as quiet as possible. The host and/or networking
information on the system are temporarily set to newconfig
values. After the command is complete these files are
returned to their previous state.

Creating keepsafe archive with file /stand/system
Creating your system file in the file /var/tmp/make_sys_image.hwsys.a15406
Appending file /.profile to keepsafe archive
.Appending file /etc/rc.config.d/hpfcmsconf to keepsafe archive
.Appending file /etc/rc.config.d/netconf to keepsafe archive
.Appending file /etc/rc.config.d/netdaemons to keepsafe archive
.Appending file /etc/rc.config.d/namesvrs to keepsafe archive
.Appending file /etc/rc.config.d/mailservs to keepsafe archive
.Appending file /etc/rc.config.d/xfs to keepsafe archive
.Appending file /etc/hosts to keepsafe archive
.Appending file /etc/group to keepsafe archive
.Appending file /etc/mail/sendmail.cw to keepsafe archive
.Appending file /etc/netgroup to keepsafe archive
.Appending file /etc/ntp.conf to keepsafe archive
.Appending file /etc/vue/config/Xsession.d/0070.recs to keepsafe archive
.Appending file /var/adm/sw/security/_ACL to keepsafe archive
.Appending file /var/adm/sw/security/_OWNER to keepsafe archive
.Appending file /var/adm/sw/security/_PROD_DFLT_ACL to keepsafe archive
.Appending file /var/adm/sw/security/_SOC_DFLT_ACL to keepsafe archive
.Appending file /var/adm/sw/security/secrets to keepsafe archive
.Appending file /var/adm/sw/security/secrets.pag to keepsafe archive
Appending file /var/adm/sw/security/secrets.dir to keepsafe archive

ERROR: The /var/opt/ignite/archives/Rel_B.11.23 directory does not exist on fcdbdev.
* Clean up: Do not interrupt; restoring files, kernel, and transition
links.

i aready check, I already created mkdir -p /var/opt/ignite/archives/Rel_B.11.23

Why system can't see my directory?

Thanks
Freddy

Re: golden image

freddy_21 — Wed, 31 Oct 2007 01:29:14 GMT

Hello All,
Anybody can help me?
I will give big point, if can help me

Thanks
Freddy

Re: golden image

Adisuria Wangsadinata_1 — Wed, 31 Oct 2007 02:13:57 GMT

Hi Freddy,

What's the owner & permission for /var/opt/ignite/archives/Rel_B.11.23 ?

Regards,
AW

Re: golden image

freddy_21 — Wed, 31 Oct 2007 02:19:03 GMT

the ownership is root:sys. about permission i don't remember.I will check later.

could i know. what is ownership and permission for /var/opt/ignite/archives/Rel_B.11.23?

Thanks
Freddy

Re: golden image

Adisuria Wangsadinata_1 — Wed, 31 Oct 2007 02:21:15 GMT

Hi Freddy,

Could you try it with bin:bin and 777 first.
Let see what happened.

Regards,
AW

Re: golden image

freddy_21 — Wed, 31 Oct 2007 02:29:00 GMT

Ok I will check permission and ownership for that directory.

thanks
Freddy

Re: golden image

Scot Bean — Wed, 31 Oct 2007 11:23:13 GMT

Show us the complete syntax you used. The destination is not working here.

Suspect that you have a '-d' option. Remove that, see if the default (/var/tmp) works better.

Re: golden image

John Payne_2 — Wed, 31 Oct 2007 12:38:46 GMT

fcdbdev is the machine you are trying to take an image of? Or is the machine you are sending the image to?

I always do my image to a local directory, with the '-d' option - "make_sys_image -s local -d /path/to/directory"

Otherwise, make_sys_image tries to write to a remote target, via NFS mount. Either you are trying locally, or trying remote. Without '-s local', you are trying remote, even if it's to the same machine. In the case you are trying remote to the same machine, I believe make_sys_image will still try to connect via NFS (or .rhosts) to your local machine, which may not have an exported directory.

Hope it helps
John

Re: golden image

Kaleung Tsou — Wed, 31 Oct 2007 16:53:02 GMT

do you have the following the /etc/exports?

/var/opt/ignite/archives -anon=2

Re: golden image

Kaleung Tsou — Wed, 31 Oct 2007 16:57:11 GMT

After you put the following in the /etc/exports directory, run the following command

exportfs -av

Re: golden image

freddy_21 — Wed, 31 Oct 2007 20:36:36 GMT

fcdbdev is the target server to save hostname.gz.

for nfs i already check. and i can mount that directory manually. using mount command.

i used this command
make_sys_image -d /var/opt/ignite/arciver/Rel_B_11.23 -s fcdbdev

thanks
Freddy

Re: golden image

freddy_21 — Wed, 31 Oct 2007 20:57:12 GMT

sorry typo command

make_sys_image -d /var/opt/ignite/archives/Rel_B.11.23 -s fcdbdev

i already check permission as adi surya said. owner: bin:bin, permission 777

thanks
Freddy

Re: golden image

Sandy Chen — Wed, 31 Oct 2007 21:34:53 GMT

Hi Fred,

What is the version of your IgniteUX, on both server?

Have you tried to mount the NFS folder locally and then create make_sys_image with target is local? When you mount the NFS locally, don't forget the permission as Adisuria said

Regards,
Sandy

Re: golden image

Sandy Chen — Thu, 01 Nov 2007 05:36:53 GMT

Hi Fred,

Another suggestion, perhaps you should enable rlogin between these 2 server

Regards,
Sandy