topic Re: diagnostics in Operating System - HP-UX

diagnostics

Jeff Hagstrom — Thu, 21 Feb 2002 19:13:45 GMT

How can I find out how much memory is on the machine and any other configuration about the machine?

Re: diagnostics

Patrick Wallek — Thu, 21 Feb 2002 19:16:35 GMT

If you have Ignite/UX installed use the print_manifest program. It provides quite a bit of useful information.

# /opt/ignite/bin/print_manifest

Re: diagnostics

Helen French — Thu, 21 Feb 2002 19:17:17 GMT

Hi,

Lot of options:

1) Use STM for all informations (xstm, mstm, cstm)

2) dmesg - will give you some information like memory, device configured etc

3) model - system model

4) uname -a - OS version and details

HTH,
Shiju

Re: diagnostics

Helen French — Thu, 21 Feb 2002 19:23:08 GMT

Hi,

Again,

# print_manifest - system installation details if ignite present

# prmavail CPU - number of CPUs, if you have PRM installed

# sar -M 1 1|awk 'END {print NR-5}' - number of CPUs

# echo itick_per_usec/D | adb -k /stand/vmunix dev/mem - processor speed

# getconf KERNEL_BITS - OS version ( 32 or 64 bit ?)

HTH,
Shiju

Re: diagnostics

Sanjay_6 — Thu, 21 Feb 2002 19:27:56 GMT

Hi Jeff,

Try these,

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=3e1fc0381812e5667c/screen=ckiDisplayDocument?docId=200000058669230

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=3e1fc0381812e5667c/screen=ckiDisplayDocument?docId=200000006437742

Hope this helps.

Regds

Re: diagnostics

Sandip Ghosh — Thu, 21 Feb 2002 19:29:15 GMT

In addition to above you can run mstsm. Go to select memory then go to tools-->Info-->run

Sandip