topic Re: Ignite C.7.2.94 in Operating System - HP-UX

Ignite C.7.2.94

Bob Purdy — Sun, 19 Aug 2007 17:32:00 GMT

We have just installed 2 new 4640 Itanium system with 2 CX300 EMCs in an HA cluster using ServiceGuard A.11.18. We also have EMC PowerPath installed on the systems. The problem we are having is when trying to create recovery tapes using make_tape_recovery -x inc_entire=vg00 the creation of the tape fails with an error message:
save_config: Error - get_system_info failed to get IO information from IO listener.
ERROR: /opt/ignite/bin/save_config failed

Any help will be greatly appreciated.

Re: Ignite C.7.2.94

AwadheshPandey — Sun, 19 Aug 2007 23:10:29 GMT

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=7162&admit=-682735245+1187582913706+28353475
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=95102&admit=-682735245+1187583008497+28353475

Re: Ignite C.7.2.94

whiteknight — Mon, 20 Aug 2007 00:03:02 GMT

Bob,

I would check /var/opt/ignite/logs/ignite see where it was stucked at.

1)#print_manifest -> can it go through successfully ?

2) Run get_system_info
# /opt/ignite/lbin/get_system_info -m -N io -f /tmp/bal.listener

for your troubleshooting.

WK

Re: Ignite C.7.2.94

Michal Kapalka (mikap) — Mon, 20 Aug 2007 00:23:45 GMT

Hi Bob,

i hade the same problem as you.

After downgrade of the Ignite from C.7.2.94 to C.6.10.97 its ok now, i had only this version in my laptop.

Best Regards Michal
/var/opt/ignite/recovery/2007-08-17,08:20/system_cfg vg00
NOTE: Boot device is: 0/1/1/0.0.0
aCC runtime: pure virtual function called for class "IONode".

message=N::Boot device is: 0/1/1/0.0.0

# ACTION NAME:CONFIG_SAVE

save_config: Error - get_system_info failed to get IO information from IO listener.
ERROR: /opt/ignite/bin/save_config failed

Re: Ignite C.7.2.94

Bob Purdy — Mon, 20 Aug 2007 10:08:33 GMT

The print_manifest command does indeed work and reports back the correct information. But the command string for running the get_system_info does not work. It just gives the halp for running thye command.

Re: Ignite C.7.2.94

whiteknight — Mon, 20 Aug 2007 11:07:03 GMT

Bob,

Question, during your make_tape_recovery is your tape drive being access by other utilities netbackup or data protector ?

as workaround avoid any netbackup or data protector access the tape drive while you perform the make_tape_recovery.

WK

Ignite C.7.3 will be out in September to fix this issue.

Re: Ignite C.7.2.94

Bob Purdy — Mon, 20 Aug 2007 11:34:52 GMT

The tape is not being accessed by any other processes.

Re: Ignite C.7.2.94

whiteknight — Mon, 20 Aug 2007 12:04:59 GMT

Hi Bob,

Are you interested to try Ignite C.7.3 to see if the problem able to resolve?

Let me know

WK

Re: Ignite C.7.2.94

whiteknight — Mon, 20 Aug 2007 12:12:13 GMT

Hi Bob,

You need to log a Service Call to HP to required the controlled release C.7.3.145 depot. If you keen to try.

WK

Re: Ignite C.7.2.94

Bob Purdy — Mon, 20 Aug 2007 12:24:22 GMT

I have opened a call with HP this morning. I assume they will make the offer to use this newer version as needed.

Re: Ignite C.7.2.94

John Dominic T. Binuya — Thu, 21 Feb 2008 05:19:24 GMT

sorry i don't have anything to add but i would like to know if anyone still experienced the same error using the newer version of ignite? I tried to use the no rewind option, but still encountered the same error.

thanks

Re: Ignite C.7.2.94

Fernando Boza — Fri, 22 Feb 2008 16:21:06 GMT

I have the same error with Ignite-UX Revision C.7.4.157

* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2008-02-22,11:03/system_cfg vg00
* Boot device is: 0/1/1/0.0.0

# ACTION NAME:ADVICE_INVENTORY

message=O::Boot device is: 0/1/1/0.0.0

# ACTION NAME:CONFIG_SAVE

save_config: Error - get_system_info failed to get IO information from IO listener.
ERROR: /opt/ignite/bin/save_config failed