Make_sys_image

Gerry Gerofsky — Mon, 09 Apr 2007 14:50:36 GMT

When I try to make a sys_image I get the following message on my screen.

I am not sure what my next steps should be? On this system I don't have big files so I thought I did not need the pax fixes, and the archive does get created but then I get a 4 as return value of make_sys_image so I am not sure what it means.

bash-3.2# /tmp/make_sys_image -s local -d /var/tmp -f /tmp/HPUXGM_22609_11624 -l 2 -n Hewlett-Packard_Unix_ver-B1111_-1530 -w /tmp/GMimageLogFile_22609_11624
* Preparing to create a system archive.
* Testing for necessary pax patch.
WARNING: The version of pax on the system to be archived needs to
be patched with one of the following patches or later.
If you do not load the pax patch, some files will not be
correctly archived (see the Ignite-UX release notes for
details):

HP-UX Patch needed
------- ------------
B.11.00 PHCO_30150
B.11.11 PHCO_32438

You can get patches over the web from the patch database at:
http://itresourcecenter.hp.com
or directly from the FTP server at:
ftp://us-ffs.external.hp.com/hp-ux_patches

You have 10 seconds to cancel archive creation...
Do you want to cancel? (y or [n])

WARNING: CLEAN_LEVEL set to 2: (see -l option for make_sys_image(1M))
While this command is executing at clean level 2, the system
should be as quiet as possible. The host and/or networking
information on the system are temporarily set to newconfig
values. After the command is complete these files are
returned to their previous state.

Creating keepsafe archive with file /stand/system
Creating your system file in the file /var/tmp/make_sys_image.hwsys.a22704
Appending file /.profile to keepsafe archive
.Appending file /etc/rc.config.d/hpetherconf to keepsafe archive
.Appending file /etc/rc.config.d/hpfcmsconf to keepsafe archive
.Appending file /etc/rc.config.d/netconf to keepsafe archive
.Appending file /etc/rc.config.d/netdaemons to keepsafe archive
.Appending file /etc/rc.config.d/namesvrs to keepsafe archive
.Appending file /etc/rc.config.d/mailservs to keepsafe archive
.Appending file /etc/rc.config.d/xfs to keepsafe archive
.Appending file /etc/hosts to keepsafe archive
.Appending file /etc/group to keepsafe archive
.Appending file /etc/mail/sendmail.cw to keepsafe archive
.Appending file /etc/netgroup to keepsafe archive
.Appending file /etc/ntp.conf to keepsafe archive
.Appending file /etc/vue/config/Xsession.d/0070.recs to keepsafe archive
.Appending file /etc/vue/config/Xconfig to keepsafe archive
Appending file /var/adm/sw/security/_ACL to keepsafe archive
.Appending file /var/adm/sw/security/_OWNER to keepsafe archive
.Appending file /var/adm/sw/security/_PROD_DFLT_ACL to keepsafe archive
.Appending file /var/adm/sw/security/_SOC_DFLT_ACL to keepsafe archive
.Appending file /var/adm/sw/security/secrets to keepsafe archive
.Appending file /var/adm/sw/security/secrets.pag to keepsafe archive
Appending file /var/adm/sw/security/secrets.dir to keepsafe archive
Appending file /etc/issue to keepsafe archive
./tmp/make_sys_image[18]: 1: not found.

* Archiving contents of r23h01.xyz.com via tar to
/var/tmp/Hewlett-Packard_Unix_ver-B1111_-1530.
* Creation of system archive complete.
* Clean up: Do not interrupt; restoring files, kernel, and transition
links.

bash-3.2# echo $?
4

Thanks

Re: Make_sys_image

Court Campbell — Mon, 09 Apr 2007 15:03:15 GMT

well I would install patch PHCO_32438 like it states in tour output. You might also want to install the latest ignite. You probably get a 4 as your return value since the pax patch test failed.

Re: Make_sys_image

Gerry Gerofsky — Tue, 10 Apr 2007 10:07:10 GMT

Opening again with different header

topic Re: Make_sys_image in Operating System - HP-UX

Make_sys_image

Re: Make_sys_image

Re: Make_sys_image