topic Re: Installing Client from Ignite in Operating System - HP-UX

Installing Client from Ignite

trytosolve — Thu, 22 Feb 2007 10:45:23 GMT

Hi All,
I have a Client which is rp3410 and i wanted to install HP-UX 11.23 on it so, i copied the WINSTALL an WINSTALLFS from the ignite to client /stand/

rebooted the system from the ISL>hpux boot /stand/WINSTALL

Traversing to configuraiton windows, in Network configuration window i have to to enter the DNS information, Domain information and so on,

Can I configure the same on Ignite, so that when i install on the client the information is pulled from ignite so that i don't need to enter this infromation when i install a new client

Re: Installing Client from Ignite

Peter Godron — Thu, 22 Feb 2007 11:33:25 GMT

Hi,
did you see:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=947746

Please also read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#33 on how to reward any useful answers given to your questions.

So far you have never awarded points !

Re: Installing Client from Ignite

Scot Bean — Fri, 23 Feb 2007 15:32:52 GMT

Yes, there are Ignite commands / syntax you can put in a local config file (most folks use /var/opt/ignite/config.local) to set common parameters every time.

See "man 4 instl_adm" for the complete list of parameters.