topic Re: make_net_recovery restore problem in Operating System - HP-UX

make_net_recovery restore problem

sriman — Mon, 21 Aug 2006 02:05:30 GMT

Hi all,
I have two rp3420,running 11.23. I have succesly taken the backup one system on anotehr by useing make_net_recovery. but when I try to restore from a make_net_recovery backup I am facing some problem.

The problem is when i run "search lan install" from PDC i am not getting any result.

even i tryed using boot lan.192.x.x.x insall, this is also failed.

both servers on same network and i am connected to servers by using the lan console.

can any one give clear stpes how to restore from the backup of make_net_recovery. I

Re: make_net_recovery restore problem

sajeer_2 — Mon, 21 Aug 2006 02:22:15 GMT

Hello Sriman,

Did you configure ingite server (your second node )properly?.

Login to the ignite server and run
/opt/ignite/bin/ignite
In the GUI,select server setup and enter the required information.

Then try to boot the client.

sajeer

Re: make_net_recovery restore problem

sajeer_2 — Mon, 21 Aug 2006 02:29:56 GMT

Hi Sriman,

Check these links for more info.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1044365

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1020340

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=964539

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1038138

Re: make_net_recovery restore problem

sriman — Mon, 21 Aug 2006 02:57:06 GMT

hi sajeer,

i just installed ignite s/w on server but i haven't configure it as ignite server (i.e, i didnt run server setup), but i configured it as server after i got this problem, then it is showing the clinet as make_net_recovery backup taken sucessfully in ignite server.

Is it required to configure the server before taking the backup ????

then i tried to restore, now it is showing the server in "sea lan insall" but when i boot from it, on the server the existing client is now showing as the new clinet.

how to select the backup location , once i booted from server

Re: make_net_recovery restore problem

sajeer_2 — Mon, 21 Aug 2006 04:26:07 GMT

Hi Sriman,

Not sure about this.I have to check it.

Re: make_net_recovery restore problem

Prashanth.D.S — Mon, 21 Aug 2006 23:14:17 GMT

Hi Simran,

Below url should help you to understand more about ignite ux..

http://docs.fc.hp.com/en/5991-5320/ch05s10.html

http://www.docs.hp.com/en/B2355-90970/index.html

Best Regards,
Prashanth