topic Re: make_recovery in Operating System - HP-UX

make_recovery

Yong Wai Choon — Tue, 11 Mar 2014 03:03:05 GMT

Hi,
Could I perform the make_recovery command while my applications are running?
Regards.

P.S. This thread has been moevd from Disk to HP-UX > ignite. - Hp forum Moderator

Re: make_recovery

Thayanidhi — Sun, 12 Jun 2005 01:39:50 GMT

make_tape_recovery is generally used to backup root (vg00). If your application doesn't run on vg00, you can run at any time.

Regds
TT

Re: make_recovery

Leif Halvarsson_2 — Sun, 12 Jun 2005 12:33:42 GMT

Hi,
The general recommendation is to shut down applications before creating a recovery archive but if you are sure that no open application files is located on vg00 it is possible to use "make_recovery" with applications running.

Re: make_recovery

KVK — Mon, 20 Jun 2005 02:42:14 GMT

Yes you can perform the make_recovery command while running the applications . Since it's taking the backup of VG00 volume group .

make_recovery command is replaced by make_tape_recovery in latest Ignite-UX versions

Please ensure it for the newest ignite version

You can obtain the latest Ignite-ux version from
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

Cheers
KVK