topic Re: how to install ignite software in Operating System - HP-UX

how to install ignite software

KAT_5 — Sat, 17 Apr 2004 05:42:10 GMT

how can we install ignite software on hpux b.11.0. Where can find this software ( cd disk ).

What is command switch is necessary to make reliable recovery tape

Re: how to install ignite software

Michael Tully — Sat, 17 Apr 2004 05:55:37 GMT

The software can be found on the application CD disk set. Depending on the age you may wish to get a later version. (recommended)

The best way to create an ignite image:
# /opt/ignite/bin/make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/0mn (assuming this is your tape drive and making sure you use a non-rewind device)

Re: how to install ignite software

KapilRaj — Sat, 17 Apr 2004 05:58:40 GMT

You should get ignite from application cds. Install it using swinstall / sam.

Search the forum with ignite and you will get to know many things

Regds,

Kaps

Re: how to install ignite software

KAT_5 — Sat, 17 Apr 2004 06:00:57 GMT

thanks , can we find this software in ECU disks

Re: how to install ignite software

Robert-Jan Goossens — Sat, 17 Apr 2004 06:17:59 GMT

Hi,

I don't know what ECU disks are, it should be on one of the application software cdrom's. If youhave a fast internet connection you can download the software from below link.

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

Hope this helps,
Robert-Jan

Re: how to install ignite software

Wodisch — Sat, 17 Apr 2004 07:33:39 GMT

Hi,

do you only ask for tools like "make_tape_recovery" or the whole remote installation server, too?
Get it form software.hp.com, use "swinstall" to install the product, then start the server's GUI from an X-Windows session using "ignite" and follow the instructions on popup window.
You'll have to be "root" to be permitted to install the HP-UX core-CDs onto your local Ignite/UX server's disk...

FWIW,
Wodisch

Re: how to install ignite software

Thierry Poels_1 — Sat, 17 Apr 2004 13:36:26 GMT

hi,

you would better download it from the HP website. The CD's contain older versions. There was an 5.x version with issues for HPUX 11.00.

Ignite version 5.3 is available on the website and is working on HPUX 11.00.

http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

good luck,
Thierry Poels.

Re: how to install ignite software

Sanjiv Sharma_1 — Sat, 17 Apr 2004 18:33:38 GMT

Hi Ali,

It is recommended that you use the Ignite UX from the website:
http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

From time to time, latest version of Ignite UX is freely awailable at
http://software.hp.com

The earlier version of Ignite UX had some issues which has been fixed in the latest version.

Command to install
# swinstall -s /depot/
/depot id the directory in which you have keep the Ignite UX software.

Command to make the ignite ux tape:
# make_tape_recovery -a /dev/rmt/0mn -x inc_entire=vg00 -Iv

Re: how to install ignite software

Sanjay_6 — Sun, 18 Apr 2004 03:32:07 GMT

Try this link for all Ignite UX faq and docs.

http://www.software.hp.com/products/IUX/index.html

Hope this helps.

Regds

Re: how to install ignite software

Bharat Katkar — Mon, 19 Apr 2004 06:34:53 GMT

Go thr' this guide .. it covers almost everything of Ignite UX Administration.

http://docs.hp.com/cgi-bin/onlinedocs.py?mpn=B2355-90834&service=hpux&path=00/00/20&title=Ignite-UX%20Administration%20Guide,%20Edition%2015